Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Halton Manuals
  4. Control Panel
  5. HSM
  6. Manual

Halton HSM Manual

Safe management, control centre
Hide thumbs

Advertisement

Quick Links

Download this manual
Halton Safe Management (HSM) – Control
centre
Overview
Terminated as of 1st January 2021
-> replaced with Halton Safe Management 2.0 (SM2)
• The Halton Safe HSM control centre is used in combination with Halton fire dampers
equipped with an actuator (operating voltage: 24 V).
• It controls the shutoff operation of fire dampers when a fire breaks out (by means of a
thermal fuse, smoke detection, or an external alarm input).
• Enables time-controlled, external or manual testing of fire damper operation.
• It produces reports on the operation test.
• The Halton Safe HSM shuts off the fans during test operation and in a fire situation
(optional).
• It has outputs for remote fire and service alarm indication.
• It also has local alarm indication for fire and service alarm conditions.
• Easy implementation
• The system is used with a 5.7" graphical touchscreen.
• An Halton Safe HSM management unit can have up to 200 fire dampers and 200 smoke
detectors connected to it.
1
Halton reserves the right to alter products without notice.

Advertisement

loading
Need help?

Need help?

Do you have a question about the HSM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Halton HSM

  • Page 1 • Enables time-controlled, external or manual testing of fire damper operation. • It produces reports on the operation test. • The Halton Safe HSM shuts off the fans during test operation and in a fire situation (optional). • It has outputs for remote fire and service alarm indication.
  • Page 2 • You can connect up to six Halton Safe Link (HSL) control units to a Halton Safe Power (HSP) 24 V unit.
  • Page 3 Dimensions...
  • Page 4 Halton Safe Power (HSP) and Link (HSL) Material Part Material Finishing Note IP40, Power supply 230VAC Halton Safe HSM Plastic White 5,7″ touchscreen IP55, polystyrene casing Halton Safe Link (HSL) Plastic White (UL94V-0, IEC 695-2-1) IP55, polystyrene casing Halton Safe Power (HSP)
  • Page 5 1–4 smoke detectors to one and smoke detectors are Halton Safe Link control unit. connected. System allowing you to connect Halton Safe, up to six Halton Safe Link (HSL) 24 VAC Power control units to a transformer Optical Model with connection...
  • Page 6 Smoke bottle Assembly stand for a duct smoke detector...
  • Page 7 Smoke detector, duct installation Smoke detector, ceiling installation...
  • Page 8 Web browser. In the event of a power cut or a fault in the Halton Safe central unit, the Halton Safe Link control units operate independently. If a Halton Safe Link control unit loses its 24 VAC operating voltage because of a fire or a power cut, the fire dampers are closed by a spring.

  • Page 9: Installation

    Installation The Halton Safe central unit is delivered with a main cable that is connected to an earthed socket. The mains cable also serves as the Halton Safe disconnect device. The Halton Safe control centre is usually composed of an I/O and central unit installed in the control centre cabinet.
  • Page 10 For more information about electrical connections, see the separate user and installation guide. Servicing and alarms The Halton Safe control centre (HSM) and Halton Safe Link (HSL) control unit do not need any special servicing. The Calectro smoke detectors for duct or ceiling installation issue the following alarms: •...

  • Page 11: Specification

    The Halton Safe management system for 200 fire dampers and 200 smoke detectors. The central unit for Halton Safe HSM can be modularly extended with Halton Safe Link control units, to which the fire dampers and smoke detectors are connected. Communication protocol...

  • Page 12: Order Code

    Web browser. In the event of a power cut or a fault in the Halton Safe central unit, the Halton Safe Linkcontrol units operate independently. If a Halton Safe Link control unit loses its 24 VAC operating voltage because of a fire or a power cut, the fire dampers are closed by a spring.

  • Page 13: Code Example

    Smoke detector, room (Calectro ST-P-DA) Test smoke aerosol (Calectro RDP-300) ZT = Tailored product (ETO) Code example HSM/D, ZT=N...