Advent UBTSW2 Owner's Manual page 2

Using Your Bluetooth Hands Free Kit
NOTE: Throughout this manual,
hold indicates pressing for 2 seconds, unless otherwise indicated.
Power On/Off
The Bluetooth kit will automatically turn on when the vehicle s key is turned to the accessory position and will
remain on until the vehicle s accessory power is turned off. After turning on, the Bluetooth kit will automatically
search for phones it was paired with previously Since multiple phones can be paired to the system the
connecting priority will be the last phone paired followed by the phone used most frequently with the system
and then the phone used second most frequently If the Bluetooth kit has not been paired to a phone pairing
will automatically activate.
Make a Call
When connected to the Bluetooth kit you may use your phone as normal to dial numbers or search your
contacts list or you can use Voice Dialing
Voice Dialing
To activate voice dialing press the ANSWER key on the Bluetooth keypad The system will prompt you for a
command. Clearly speak your command (for example, call Shaun
attempt to call Shaun
End a Call
To end a call press and hold the END key
Answer a Call
During an incoming call, the vehicle's radio will be muted / turned off and the call will ring through the vehicle's
speakers. To answer an incoming call, press the ANSWER key.
Ignore an Incoming Call
To ignore an incoming call press and hold the END key for 2 seconds.
Redial the Last Number
To redial the last number, press and hold the ANSWER key for 2 seconds.
Adjust the Call Volume
During a call, you can adjust the volume up/down using the ANSWER key or END key. Each press raises or
lowers the volume by 1 level. When the minimum or maximum volume is reached, the system will beep twice.
Transfer a Call
To transfer a call between Bluetooth hands free and normal phone operation, press and hold the ANSWER key
on the Bluetooth keypad for 2 seconds.
Pairing
To activate phone pairing, press and hold the END key for 10 seconds Next activate pairing on the phone
refer to the phone s owners manual). When a pin code is requested during pairing, enter 1234 using the
phone
2
press indicates pressing for less than 1 second. Press and
The system will confirm the command and