Panasonic TH-55GZ1000U Operating Instructions Manual page 19

Table of Contents

Advertisement

25 Last view
Switches to previously viewed channel or input
mode.
26 Operations for contents, connected equipment,
etc.
27 Off Timer
Sets the time for the TV to automatically turn off.
28 Aspect
Changes aspect ratio.
Installing / Removing batteries
Pull open
Hook
Close
Note the correct polarity
(+ or -)
Indicator / Control panel
When pressing 4, 5, 6 buttons, the control panel
guide appears on the right side of the screen for
3 seconds to highlight which button has been
pressed.
1
2 3
Rear side of the TV
1 Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
2 Ambient sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture Menu is set to
[On].
3 Power LED
4 Input mode selection
5 Channel Up / Down
6 Volume Up / Down
7 Mains power On / Off switch
Panel maintenance
Be sure to turn the TV off with the remote control to
perform the panel maintenance. During the panel
maintenance, LED turns to orange.
During panel maintenance, avoid touching and exerting
any pressure on the screen. (e.g. wiping the screen,
etc.)
There are two types of the maintenance as following.
4
5
6
7
Red: Standby
Green: On
Depending on the ambient brightness,
adjusts the brightness of LED to easy-to-
view levels automatically.
Orange: Standby with some functions (recording,
etc.) active or panel maintenance in
progress
The LED blinks when the TV receives a command
from the remote control.
Press repeatedly until you reach the desired mode.
[Main Menu]
Press and hold for about 3 seconds to display main
menu.
OK (when in the menu system)
Cursor Up / Down (when in the menu system)
Cursor Left / Right (when in the menu system)
Use to switch the mains power.
To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
[
]: Standby / On
Normal maintenance automatically starts, and it takes
approx. 10 minutes.
Regular maintenance takes approx. 80 minutes.
When regular maintenance is necessary, the
message appears on the screen after turning the
TV off with the remote control. Follow the on-
screen instructions.
During the panel maintenance, a white horizontal
line appears on the screen for a while. This is not
a malfunction.
For information about panel maintenance, refer to
[eHELP] (Search by Purpose > Watching > For best
picture > Screen Settings).
19
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-65gz1000u

Table of Contents