Table of Contents
Advertisement
Step 2: Power up
A.
Plug the provided power cord into your digital box, then plug the other end
into an electrical outlet.
B.
Confirm that the TV input is set to the same input as the HDMI cable was
plugged into on the back of the TV (HDMI 1, HDMI 2, HDMI 3, etc).
Tip: if you a unsure where the HDMI cable was plugged into, look for a button labeled
INPUT or SOURCE on your factory TV remote. Pressing this button repeatedly will cycle
through all the TV's inputs. If the incorrect HDMI port on the TV is selected, the TV will
display NO SIGNAL.
Step 3: Pairing your remote
A.
Make sure your TV and box are both turned on.
B.
Before you can configure anything, you need to pair the remote.
Point the remote at the box. Follow the onscreen instructions.
C.
After pairing, your remote may download and install updates.
2
Advertisement
Table of Contents
