Related Manuals for Tectro TSC126
Summary of Contents for Tectro TSC126
- Page 1 TSC126 GEBRAUCHSANWEISUNG BRUGSANVISNING INSTRUCCIONES DE USO MANUEL D'UTILISATION KÄYTTÖOHJE OPERATING MANUAL...
- Page 2 Dear Sir, Madam, Congratulations on the purchase of your Tectro airconditioner. You have acquired a high quality product that, if used responsibly, will give you many years of pleasure. Please read these instructions for use first in order to ensure the maximum life span of your airconditioner.
-
Page 3: Table Of Contents
CONTENTS SAFETY INSTRUCTIONS PARTS NAMES OPERATING TEMPERATURE MANUAL OPERATION OPERATION WITH REMOTE CONTROL OPTIMAL OPERATION ADJUSTING AIR FLOW DIRECTION HOW THE AIR CONDITIONER WORKS MAINTENANCE OPERATION TIPS TROUBLESHOOTING TIPS GUARANTEE CONDITIONS TECHNICAL DATA READ THIS MANUAL Inside you will find many helpful hints on how to use and maintain your air con- ditioner properly. - Page 4 • Have any repairs and/or maintenance only carried out by a recognised service engineer or your recognised Tectro supplier. Follow the instructions for use and maintenance as indicated in the user manual of this device. • Always remove the plug of the unit from the wall socket when it is not in use.
- Page 5 • It is advised to stay out of the direct airstream. • Never drink the drain water from the airconditioner. ATTENTION! • Never use the device with a damaged power cord, plug, cabinet or control panel. • Failing to follow the instructions may lead to nullification of the guarantee on this device.
-
Page 6: Operating Temperature
FUNCTION INDICATORS ON INDOOR UNIT DISPLAY PANEL Signal receptor AUTO indicator This indicator illuminates when the air conditioner is in AUTO operation. PRE-DEF indicator The air conditioner starts defrosting automatically if outdoor unit frosts in heating operating. At this time the PRE.-DEF. indicator illuminates. ECON indicator This indicator illuminates while the air conditioner is in economic operation. -
Page 7: Manual Operation
MANUAL OPERATION The air conditioner can be operated manually on the air conditioner itself as well as with the remote con- trol included. For operation with the remote control please refer to chapter E “Operation with Remote Control”. When operating without the remote control the air conditioner will only work in the AUTO-mode. For operation without the remote control follow these instructions: Panel Manual control... -
Page 8: Operation With Remote Control
OPERATION WITH REMOTE CONTROL NOTE! • Always aim the remote controller towards the receiver on the indoor unit and make sure there are no obstacles in between the remote control and the receiver on the indoor unit. Otherwise the remote control signal will not be picked up by the receiver and the air conditioner will not work properly. - Page 9 Timer on Button: Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10Hr, each press will incre- ase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, continue pressing the button until nothing displays.
- Page 10 OFF. If both operations are set, it will show TIMER ON-OFF which indicates you have chosen to set both the starting time and off time. FAN SPEED Indicator: Press the FAN SPEED button to select the desired fan speed setting (Auto-Low-Med-High). Your selecti- on will be displayed in the LCD window except the Auto fan speed.
- Page 11 COOL, HEAT, and FAN ONLY Operation If the AUTO mode is not comfortable, you may manually override the settings by using COOL, DRY, HEAT (HEAT PUMP units only), or FAN ONLY modes by pressing button Push the button ( ) to set the desired room temperature. When in COOLING mode, the most comfortable settings are 21ºC or above.
-
Page 12: Optimal Operation
Set the starting & stopping time 3.1 Push the Timer on button , the remote controller display will show ON TIMER, the last set time for Timer on operation in hours will be shown on the Timer display area. You are now ready to readjust the Timer on to start the operation. -
Page 13: Adjusting Air Flow Direction
ADJUSTING AIR FLOW DIRECTION • Adjust the air flow direction properly otherwise, it might cause discomfort or cause uneven room temperatures. • Adjust the horizontal louver using button on the remote controller. • Adjust the vertical louver manually. Adjusting the horizontal Air Flow Direction (up - down) The air conditioner automatically adjusts the horizontal air flow direction in accor- dance with the operating mode. -
Page 14: How The Air Conditioner Works
CAUTION • The AIR DIRECTION and SWING buttons will be disabled when the air conditioner is not in operation (including when the TIMER ON is set). • Do not operate the air conditioner for long periods with the air flow direction set downward in cooling or dry mode. -
Page 15: Maintenance
MAINTENANCE WARNING It is necessary to stop the air conditioner and disconnect the power House- hold supply before cleaning. Drain Cleaner Cleaning the indoor unit and remote controller Thinner CAUTION • Use a dry cloth to wipe the indoor unit and remote controller. •... - Page 16 Maintenance If you plan to idle the unit for a long time, perform the following: Operate the fan for about 6 hours to dry the inside of the unit. Stop the air conditioner and disconnect power. Remove the batteries from the remote controller. The outdoor unit requires periodic maintenance and cleaning.
-
Page 17: Operation Tips
OPERATION TIPS The following events may occur during normal operation. 1. Protection of the air conditioner. Compressor protection • The compressor cannot restart for 3 minutes after it stops. Anti-cold air • The unit is designed not to blow cold air on HEAT mode, when the indoor heat exchanger is in one of the following three situations and the set temperature has not been reached. -
Page 18: Troubleshooting Tips
6. The air conditioner turns to FAN only mode from COOL or HEAT mode. • When indoor temperature reaches the temperature setting on air conditioner, the compressor will stop automatically, and the air conditioner turns to FAN only mode. The compressor will start again when the indoor temperature rises on COOL mode or falls on HEAT mode to the set point. - Page 19 Problem Cause Solution Power cut Wait for power to be restored. Check that plug is securely in wall Unit may have become unplugged. receptacle. Replace fuse / reset relay / reset Fuse may have blown. circuitbraker Battery in Remote controller may have Unit does not start Replace the battery.
-
Page 20: Guarantee Conditions
GUARANTEE CONDITIONS The air conditioner is supplied with a 24-month guarantee, commencing on the date of purchase. All mate- rial and manufacturing defects will be repaired or replaced free of charge within this period. The following rules apply: We expressly refuse all further damage claims, including claims for collateral damage. Repairs to or replacement of components within the guarantee period will not result in an extension of the guarantee. -
Page 21: Technical Data
TECHNICAL DATA Model TSC 126 Type air-conditioner Wall mounted split Cooling capacity (max) * 2600 EE Class* EER* Heating capacity (max) * 3100 Heating performance COP* 2.87 Dehumidifying capacity ** L / 24h Power consumption cooling Power consumption heating Power supply V / Hz / Ph 220 - 240 / 50 / 1 Current (nom.) cooling / heating... - Page 22 DISTRIBUTED IN EUROPE BY PVG INTERNATIONAL B.V. i ÖSTERREICH 4 UNITED KINGDOM PVG Austria VertriebsgmbH Scott Brothers Ltd. The Old Barn, Holly House Estate Salaberg 49 Cranage, Middlewich, CW10 9LT UK 3350 HAAG tel.: +44 1606 837787 tel: +43 7434 44867 fax: +44 1606 837757 fax:...