Cut Paper Sheet; Loading Of Cut Paper Sheet; Fig. 37 Loading Of Roll Paper (2); Fig. 38 Loading Of Roll Paper (3) - Epson MX-80 Operation Manual

7.3. Cut paper sheet

7.3.1. Loading of cut paper sheet

The MX-80 F/T Type I I accommodates cut paper sheets measuring 8.3" to 8.5" in
width. To load a cut paper sheet, observe the following procedure.
STEP 1. Raise the printer lid.
STEP 2. Unlock the release lever. (See Fig. 39.)
STEP 3. Pull the scale toward the front of the Printer to detach the scale from
the platen. (See Fig. 39.)
STEP 4. Confirm that the paper guide roller is at the center of the sprocket shaft.
If not, set it at the center of the shaft.
NOTE: The paper guide contributes to smooth paper feeding.
STEP 5. Insert the cut paper sheet between the paper guides at the rear part of
printer mechanism.
NOTE: The paper sheet can be installed without removing the separator.
- 3 0 -