Verizon ASK-NCQ1338 User Manual page 7

WPS
WPS is an easy way to add supported Wi-Fi devices to your network. Press the WPS button on the back of the router to activate WPS. You
will need to activate WPS on your Wi-Fi device too. Refer to 5.2.5 Wi-Fi Settings > WPS for more information.
LED
The LED indicates the system and connection status, and WPS activity.
Front LED
Mode
Bootup
Cellular signal (or after single click
pair button)
Regular usage
Paring
Other
Ethernet Status
Port LED
Mode
Wired LAN Ethernet > 100M*
connection Link
Ethernet > 100M*
Activity
http://support.verizon.com/router
Status
System Off
System Booting
Firmware update (FOTA)
Passing signal
No Signal, Cold SIM
No SIM Card
Setup complete
WiFi disabled by user
WPS Paring
Factory Reset
FW Error
Left LED Right LED
Off Solid White
Off Blinking White
LED1 Pattern
Off
Soft blink White
Fast blink white
Solid White
Solid Red
Hard blink red
50% bright White
Solid Green
Hard blink Blue
Fast blink yellow
Soft blink red
4