Ninja COFFEE BAR CF087 Owner's Manual page 13

Troubleshooting Guide - cont.
PROBLEMS
The cup, travel mug or carafe may not have been empty prior to brewing.
The water exceeded the Max Fill line on the water reservoir prior to brewing.
The Ninja Coffee Bar
Cup 9.5 oz
Travel Mug 14 oz
My cup, travel mug or
Half Carafe 19 oz
carafe overflowed.
Carafe 38 oz
Please ensure that you are using at least a 12 oz. cup for the cup size and a 16 oz. travel
mug for the travel mug size.
NOTE: On Rich Brew, Over Ice Brew, and Specialty Brew there will be less volume
dispensed.
Brew basket
Check the amount of coffee or type of grind used.
overflowed.
If water was filled above the Max Fill line, water may overflow from the overflow hole at
My water reservoir is
the top of the hand grip. Remove the water reservoir from the brewer and empty to the
leaking.
Max Fill line.
Ninja Coffee Bar ™
and Auto-iQ One Touch Intelligence will only use the water needed for the brew size
™
and style selected.
After a brew you may notice left over water in your water reservoir after filling to the
Water left in my
minimum fill line of the size selected. The water reservoir markings are minimum fill lines
reservoir.
that indicate if there is enough water for the proper brew size in the reservoir for any
brew style in that size, but all brew styles use different amounts of water to create the
proper flavor and concentration.
You can brew multiple cups before needing to refill.
Does it take coffee
This brewer is designed to brew coffee grounds only. Do not insert pods or K-Cups
pods?
If the leak is coming from the brew basket, be sure all the parts are fit securely in the
brewer.
My Ninja Coffee Bar is
™
leaking.
If the leak is coming from the bottom of the brewer call customer service
at 1-877-646-5288.
Ensure the water reservoir is locked in place and is filled with enough water for the
desired brew.
My Ninja Coffee Bar ™
Check the CLEAN indicator light. If illuminated, run a clean cycle with the appropriate
beeped and did not
descaling solution or a white vinegar mixture. See Care & Maintenance section.
complete the full brew
Check the Drip Stop indicator light. If illuminated, ensure the brew basket is fully inserted
that I selected.
into the brewer and open the Drip Stop once the vessel is placed under the brew basket.
If the problem persists please call customer service at 1-877-646-5288.
Why is the second cup
Once the Ninja Coffee Bar
that I brewed hotter
This enables any following brews to be slightly hotter. For a hot first cup try pre-warming
your mug.
than the first brew?
*K-Cup is a registered trademark of Keurig Green Mountain, Inc. Use of the K-Cup trademark does not imply any affiliation with
or endorsement by Keurig Green Mountain, Inc.
23
1-877-646-5288
POSSIBLE REASONS & SOLUTIONS
is designed to dispense the following amounts on classic brew:
™
allows you to fill the reservoir up to but not exceeding the Max Fill line
has brewed the first cup, the brewing system is pre-warmed.
™
PROBLEMS
I noticed the carafe
design & lid. What are
the benefits?
Coffee Brew Volume:
What impacts coffee
brew volume?
How does the Ninja
coffee bar keep
coffee at the right
temperature?
.
®
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjcoffeebar.com
or feel free to contact customer service: 1-877-646-5288.
POSSIBLE REASONS & SOLUTIONS
Our unique carafe shape and design has the following benefits:
Easy grip design making it easy to pour coffee without dripping.
Thoroughly mix your coffee from the first drop to the last thanks to the Brew-Through
Carafe Lid.
Optimize coffee temperature.
Allow you to brew both hot and iced coffee.
When you make hot coffee, coffee grounds will absorb some of the water that is brewed
resulting in slightly less brewed coffee than the water used. The more coffee you use,
the more water will be absorbed. Additionally, our wider bottom carafe holds most of the
volume coffee at the base which helps control the temperature more evenly.
Classic Brew:
Full Carafe
The carafe is designed to keep most of the coffee volume in the bottom so it can be held
closer to the Precise Temp Warming plate. This helps maintain the coffee at the ideal
drinking temperature.
Go to www.ninjacoffeebar.com for more
information and how-to videos.
Half Carafe
24
www.ninjacoffeebar.com