Approx appLS15I Setting Manual
  1. Manuals
  2. Brands
  3. Approx Manuals
  4. Barcode Reader
  5. appLS15I
  6. Setting manual

Approx appLS15I Setting Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the appLS15I and is the answer not in the manual?

Questions and answers

Related Manuals for Approx appLS15I

Summary of Contents for Approx appLS15I

  • Page 2: Table Of Contents

    1D Barcode Scanner Setting Manual V1.10 Table of Contents Chapter1 System Settings......................7 Introduction..............................7 Restore Defaults............................8 version................................8 Start off setting code..........................9 Programming Barcode Data........................10 Reading mode selection...........................11 Decode sound settings..........................15 Increased/decreased sound........................15 Sound frequency............................15 Data transmit speed..........................16 Image recognition method........................17 Chapter1 Communication setting...................18 Introduction..............................18 USB-KBW Mode.............................18 PS2 Keyboard Mode..........................22...
  • Page 3 1D Barcode Scanner Setting Manual V1.10 Code 11..............................51 Interleaved 2 of 5.............................52 Matrix 2 of 5.............................52 Industrial 2 of 5............................53 Standard 2 of 5(IATA)..........................53 Codabar（NW-7）..........................54 Plessey..............................55 MSI Plessey..............................55 GS1 DataBar Limited（RSS Limited）....................56 GS1 DataBar Omnidirectional（RSS Omnidirectional）...............56 China Post（Datalogic 2 of 5）......................57 Add-on Code............................58 Chapter5 Serial Communication Instruction................59 Instruction..............................59...

  • Page 4: Chapter1 System Settings

    1D Barcode Scanner Setting Manual V1.10 Chapter1 System Settings Introduction The user can set the function of the barcode reader by scanning one or more setting barcodes。 Scanning Instructions In the Trigger Mode, the scanning barcode operation steps are as follows 1.

  • Page 5: Restore Defaults

    1D Barcode Scanner Setting Manual V1.10 Restore Defaults All barcode readers have a factory default setting. Reading the "Restore default settings" barcode will restore all barcode reader property settings to the factory state. You are most likely to use this bar code in the following situations： 1、Error in barcode reader settings, such as barcode not recognized.

  • Page 6: Start Off Setting Code

    1D Barcode Scanner Setting Manual V1.10 Start off setting code The setting code can be turned off. When the barcode reader is set to “Enter Setup”, the setup function will work when the setup code is scanned. When the barcode reader is set to “Exit Setup”, the scanner engine will scan the setup code.

  • Page 7: Programming Barcode Data

    1D Barcode Scanner Setting Manual V1.10 Programming Barcode Data Programming barcode data can be transmitted to the Host. Scan the appropriate barcode below to enable or disable the transmission of programming barcode data (i.e. the characters under programming barcode) to the Host.Default is setting code not send. 02501 Transmit Programming Barcode Data 02500...

  • Page 8: Reading Mode Selection

    1D Barcode Scanner Setting Manual V1.10 Reading mode selection Trigger Mode The user can set the reading mode of the barcode reader according to the needs. The default state is the Trigger Mode. In this mode, the barcode reader starts reading after pressing the trigger button, and the barcode reader stops reading after successfully reading or unlocking the trigger button.
  • Page 9 1D Barcode Scanner Setting Manual V1.10 Sense Mode After the setting is completed, there is no need to trigger, and the barcode reader starts detecting the change of the environment before the window. After the reading is complete, it stops and is in the monitoring state waiting for the next environmental change.
  • Page 10 1D Barcode Scanner Setting Manual V1.10 Flashing mode (Press key to turn on) After the setting is completed, the scanning needs to be triggered manually, the red light of the barcode reader is blinking, and the barcode reader starts to detect the change of the environment before the window is opened.
  • Page 11 1D Barcode Scanner Setting Manual V1.10 Press Key to delay single read mode After the setting is completed, press the trigger button, the red light of the barcode reader will be on for 3 seconds, and the unread code light will be extinguished for 3 seconds after the timeout, or the light will be off after the reading is completed.

  • Page 12: Decode Sound Settings

    1D Barcode Scanner Setting Manual V1.10 Decode sound settings The barcode reader will have a roar tone after successfully reading the barcode. Users can Disable or Enable the roar tone according to the demand. The default is to enable decoding sound. 014201 014200 Enable decoding sound*...

  • Page 13: Data Transmit Speed

    1D Barcode Scanner Setting Manual V1.10 Data transmit speed The barcode reader supports the adjustment of data transmit speed. For non-standard USB input used by some WINDOWS devices, for example, the PS2 converted USB interface can reduce the data transfer security and integrity by appropriately reducing the barcode transmit speed.

  • Page 14: Image Recognition Method

    1D Barcode Scanner Setting Manual V1.10 Image recognition method The barcode reader supports the recognition of reverse-colored images (anti-white bar codes). The user can set whether or not the image needs to be reversed according to the requirements. The default is forward image recognition。 00161 00160 Forward image recognition*...

  • Page 15: Chapter1 Communication Setting

    1D Barcode Scanner Setting Manual V1.10 Chapter1 Communication setting Introduction When using this barcode to communicate with different hosts, you need to set the barcode reader to the corresponding communication interface mode. The user can set the barcode scanner function by scanning one or more setting barcodes. Users can choose to use USB-KBW, USB-COM, PS2,TTL / RS232 serial communication interface mode.
  • Page 16 1D Barcode Scanner Setting Manual V1.10 Country/language keyboard layout selection Different national languages correspond to the keyboard keys arrangement, symbols, etc. are different, the barcode scanner can be virtual according to the actual needs of different countries keyboard. 0005000 0005001 USA/China（English）* Canada（French）...
  • Page 17 1D Barcode Scanner Setting Manual V1.10 Italy (Italian) France (French)
  • Page 18 1D Barcode Scanner Setting Manual V1.10 0005010 0005011 Germany (Slang) Norway (North Sami) 0005012 0005013 Sweden/Finland (Swedish/Finnish) Slovak (Slovak) 0005014 0005015 Portugal (Portuguese) Czech Republic (Czech) 0005016 0005017 Belgium (Dutch) Turkish-F 0005018 0005019 Turkish-Q Poland (Polish 214) 0005020 0005021...
  • Page 19 1D Barcode Scanner Setting Manual V1.10 Switzerland (German/French) Croatian (Croatian)
  • Page 20 1D Barcode Scanner Setting Manual V1.10 0005022 0005023 Hungary (Hungarian) Japan (Japanese) 0005024 Russia (Russian)

  • Page 21: Ps2 Keyboard Mode

    1D Barcode Scanner Setting Manual V1.10 PS2 Keyboard Mode 000600 USB-COM When the barcoder uses USB communication interface, but the host application uses serial communication to receive data, you can set the barcode to USB virtual serial communication mode. This feature requires installing the appropriate driver on the host. 000603 USB-COM...

  • Page 22: Ttl/Rs232 Mode

    1D Barcode Scanner Setting Manual V1.10 TTL/RS232 mode The serial communication interface is a common way to connect barcode and host devices and can be used to connect host devices such as PC and POS. When using the serial communication interface of the barcode scanner, the barcode scanner and the host device must be completely matched in the configuration parameters of the serial communication protocol to ensure the accuracy of data transmit.
  • Page 23 1D Barcode Scanner Setting Manual V1.10 000703 000704 2400bps 4800bps 000705 000706 9600bps* 19200bps 000707 000708 38400bps 57600bps 000709 115200bps...

  • Page 24: Chapter3 Data Editing

    1D Barcode Scanner Setting Manual V1.10 Chapter3 Data Editing Introduction After the barcode scanner is successfully decoded, the device will get a series of data, which can be numbers, English, symbols, etc. In application, we may not only need the barcode data information, or the barcode contains data information can not meet your requirement.

  • Page 25: Code Id Setting

    1D Barcode Scanner Setting Manual V1.10 Code ID Setting In the process of using the barcode reader, the user often needs to know the barcode type of the currently scanned barcode, and we can use the Code ID prefix to identify the barcode type.

  • Page 26: Custom Prefix

    1D Barcode Scanner Setting Manual V1.10 Custom Prefix First read "Set Custom Prefix", then scan the character barcode corresponding to "Appendix - Character Table" according to the requirements. You can complete the setup. The prefix character can add up to 32 characters. 02240 Set Custom Prefix For example: Set the custom prefix to "VC"...

  • Page 27: Clear All The Prefix

    1D Barcode Scanner Setting Manual V1.10 Clear all the prefix. Scan “ clear all the prefix codes”barcode, user can clear all the prefix codes. 02220 clear all the prefix codes...

  • Page 28: Custom Suffix

    1D Barcode Scanner Setting Manual V1.10 Custom suffix First read the "Set custom suffix", and then scan the character code corresponding to "Appendix - Character Table" according to requirements. You can complete the setup. The suffix character can add up to 32 characters. 02241 Set custom suffix For example: Set the custom prefix to "VC"...

  • Page 29: Clear All Suffixes

    1D Barcode Scanner Setting Manual V1.10 Clear all suffixes Scan the "Clear all suffixes" barcode to clear all set suffix characters 02200 Clear all suffixes Note: Clear suffix characters do not include suffix terminators.

  • Page 30: Exit To Set Prefix And Suffix

    1D Barcode Scanner Setting Manual V1.10 Exit to set prefix and suffix After users add a custom suffix, you can scan "Exit suffix" to finish adding suffixes. 02242 Exit to set prefix and suffix"...

  • Page 31: Hidden Characters

    1D Barcode Scanner Setting Manual V1.10 Hidden characters Users can hide the bar code output barcode according to their needs. For example, for the bar code "123456", the data received by the host is "3456" when the preceding two characters are hidden. When the trailing 2-bit characters are hidden, the data received by the host is "1234".
  • Page 32 1D Barcode Scanner Setting Manual V1.10 Unhide leading characters Hide the Postposition character Users can scan the following bar codes according to their needs and set the corresponding number of digits to be hidden. 023301 023302 Hide the Postposition 1 character Hide the Postposition 2 characters 023303 023305...
  • Page 33 1D Barcode Scanner Setting Manual V1.10 Hide intermediate characters Users can scan the following bar codes according to their needs and set the hidden middle digits. The setup procedure consists of two steps. First, the beginning of the character is scanned for the Mth bit, and then the middle N-bit character is hidden by scanning.
  • Page 34 1D Barcode Scanner Setting Manual V1.10 from seventh character start from eighth character start Hide intermediate N-bit characters 023901 023902 Hide intermediate 1 characters Hide intermediate 2 characters 023903 023904 Hide intermediate 3 characters Hide intermediate 4 characters 023905 023906 Hide intermediate 5 characters Hide intermediate 6 characters 023907...
  • Page 35 1D Barcode Scanner Setting Manual V1.10 023900 Unhide the middle character...

  • Page 36: Suffix Setting

    1D Barcode Scanner Setting Manual V1.10 Suffix setting The end character is used to mark the end of a complete data message. The suffix of end character must be the last content of a data transmit, then there will be no additional data. Difference between suffix of end character and customized suffix is that the contents and decoding information of the customized suffix , prefix and other contents can be formatted, but suffix of end character can’t make it.

  • Page 37: Character Conversion

    1D Barcode Scanner Setting Manual V1.10 Character conversion By setting the character conversion function of the barcode scanner, the upper case and lower case conversions of the English letters of the barcode output data can be performed. For example, if the content of the barcode is aBC123, set the barcode to "all in lower case" and the data obtained by the host will be "abc123".

  • Page 38: Chapter4. Bar Code Parameter Settings

    1D Barcode Scanner Setting Manual V1.10 Chapter4. Bar Code Parameter Settings Introduction Each type of barcode has its own unique properties,Through the setting code of this chapter, you can adjust the barcode reader to adapt to these property changes.The fewer types of barcodes that are enabled to enable reading,The faster the barcode reads.You can disable barcode scanners from reading barcode types that will not be used, to improve the performance of the barcode scanner.
  • Page 39 1D Barcode Scanner Setting Manual V1.10 Transmit Check Digit UPC-A Barcode data is fixed at 13 characters,Number 13 is the parity bit,used to verify the correctness of all 13 characters, The default is to transmit the check digit. 00421 00420 Transmit check Digit * Do not transmit check Digit Whether to read additional bits...
  • Page 40 1D Barcode Scanner Setting Manual V1.10 System character UPC-A The country code of the barcode is the prefix character, this character is not normally displayed in human-readable characters below the bar code,“0”representative USA.The first character in the human-readable character is a system character. Default does not send country characters，transmit system character.

  • Page 41: Upc-E

    1D Barcode Scanner Setting Manual V1.10 UPC-E Enable/Disable UPC-E 00351 00350 Enable UPC-E* Disable UPC-E Transmit Check Digit UPC-E Barcode data is fixed at 8 characters，bit 8 is the parity bit，used to verify the correctness of all 8 characters,the default is to transmit the check digit. 00441 00440 Transmit check Digit *...
  • Page 42 1D Barcode Scanner Setting Manual V1.10 Whether to read additional bits Additional bits refer to 2 or 5 digit barcodes added after the normal barcode, As shown below, the left blue line box is an ordinary bar code, the right side of the red box is an additional bit.
  • Page 43 1D Barcode Scanner Setting Manual V1.10 Extended settings UPC-E barcode type supports extended settings, after opening extensions, Barcode information expanded to 13 bits, and the type is converted to UPC-A, the default is not extended. 00381 00380 Barcode information is expanded, and the Do not expand barcode information * type is converted to UPC-A...
  • Page 44 1D Barcode Scanner Setting Manual V1.10 EAN-8 Enable/Disable EAN-8 00371 00370 Enable EAN-8* Disable EAN-8 Transmit Check Digit EAN-8 barcode data is fixed at 8 characters, Bit 8 is the parity bit, used to verify the correctness of all 8 characters，the default is to transmit the check digit. 00571 00570 Transmit check Digit *...
  • Page 45 1D Barcode Scanner Setting Manual V1.10 Whether to read additional bits Additional bits refer to 2 or 5 digit barcodes added after the normal barcode, as shown below，The left blue line box is an ordinary bar code，the right side of the red box is an additional bit.
  • Page 46 1D Barcode Scanner Setting Manual V1.10 EAN-13 Enable/Disable EAN-13 00361 00360 Enable EAN-13* Disable EAN-13 Transmit Check Digit EAN-13 barcode data is fixed at 13 characters, Bit 13 is the parity bit，used to verify the correctness of all 13 characters，the default is to transmit check digit. 00461 00460 Transmit Check Digit *...
  • Page 47 1D Barcode Scanner Setting Manual V1.10 Whether to read additional bits Additional bits refer to 2 or 5 digit barcodes added after the normal barcode，as shown below, the left blue box is an ordinary bar code, and the right red box is an extra bit.

  • Page 48: Code 128

    1D Barcode Scanner Setting Manual V1.10 Code 128 Enable/Disable Code 128 00691 00690 Enable Code 128* Disable Code 128 Code 39 Enable/Disable Code 39 00221 00220 Enable Code 39* Disable Code 39...
  • Page 49 1D Barcode Scanner Setting Manual V1.10 Transmit Start/Stop Character A character "*" as a start and stop character before and after the Code 39 barcode data，you can set whether the start and stop characters are transmitted together with the barcode data after the reading is successful. 00281 00280 Transmit Start/Stop Character...

  • Page 50: Code 93

    1D Barcode Scanner Setting Manual V1.10 00621 00620 Enable Code 93* Disable Code 93 Check Digit Verification Code 93 barcode data does not include check digits, if there is a check digit，is the last 2 characters of the data. the check digit is a calculated value based on all data，used to verify that the data is correct.

  • Page 51: Code 11

    1D Barcode Scanner Setting Manual V1.10 Code 11 Enable/Disable Code 11 01261 01260 Enable Code 11* Disable Code 11 Check Digit Verification Code 11 Barcode data does not necessarily include check bits, if there is a check digit，it can be the last 1 or 2 characters of the data. The check digit is a value calculated from all data to verify that the data is correct.

  • Page 52: Interleaved 2 Of 5

    1D Barcode Scanner Setting Manual V1.10 Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5 00961 00960 Enable Interleaved 2 of 5* Disable Interleaved 2 of 5 Matrix 2 of 5 Enable/Disable Matrix 2 of 5 01461 01460 Enable Matrix 2 of 5* Disable Matrix 2 of 5...

  • Page 53: Standard 2 Of 5(Iata)

    1D Barcode Scanner Setting Manual V1.10 Industrial 2 of 5 Enable/Disable Industrial 2 of 5 01061 01060 Enable Industrial 2 of 5* Disable Industrial 2 of 5 Standard 2 of 5(IATA) Enable/Disable Standard 2 of 5 01871 01870 Enable Standard 2 of 5* Disable Standard 2 of 5...
  • Page 54 1D Barcode Scanner Setting Manual V1.10 Codabar（NW-7） Enable/Disable Codabar 00851 00850 Enable Codabar* Disable Codabar Transmit Start/Stop Character 00861 00860 Transmit Start/Stop Character Do not Transmit Start/Stop Character*...

  • Page 55: Plessey

    1D Barcode Scanner Setting Manual V1.10 Plessey Enable/Disable Plessey 01161 01160 Enable Plessey Disable Plessey* MSI Plessey Enable/Disable MSI Plessey 01151 01150 Enable MSI Plessey Disable MSI Plessey*...

  • Page 56: Gs1 Databar Limited（Rss Limited

    1D Barcode Scanner Setting Manual V1.10 GS1 DataBar Limited（RSS Limited） Enable/Disable RSS Limited 01771 01770 Enable RSS Limited Disable RSS Limited* GS1 DataBar Omnidirectional（RSS Omnidirectional） Enable/Disable RSS Omnidirectional 01671 01670 Enable RSS Omnidirectional Disable RSS Omnidirectional*...

  • Page 57: China Post（Datalogic 2 Of 5

    1D Barcode Scanner Setting Manual V1.10 China Post（Datalogic 2 of 5） Enable/Disable China Post 01571 01570 Enable China Post DisableChina Post*...

  • Page 58: Add-On Code

    1D Barcode Scanner Setting Manual V1.10 Add-on Code Users can do additional setting by scanning following UPC/EAN/JAN code 00551 00552 Enable 2-Digit add-on Code Enable5-Digit add-on Code 00553 00550 Enable 2-Digit or 5-Digit add-on Code Disable Add-on Code* 02611 02610 Add-on Code Required Add-on Code Not Required...

  • Page 59: Chapter5 Serial Communication Instruction

    1D Barcode Scanner Setting Manual V1.10 Chapter5 Serial Communication Instruction Instruction When using the serial port mode, the barcode reader can control the barcode scanner to send commands or set related functions by sending relevant instructions. Serial instruction is fixed to 16 bytes in one frame（16bytes，1byte=8bit）. Frame format structure Serial port instruction one frame format is as follows：...

  • Page 60: Instruction Parsing

    1D Barcode Scanner Setting Manual V1.10 Instruction Parsing When CMD=0x01, it indicates a control instruction. DA0=0x01, control the barcode reader switch command, can control the barcode reader to open or close the decoding function. DA1=0x00, Controlling the Barcode Off (Decoding Off) DA1=0x01, control the barcode reader on (open decoding, no timeout, no highlighting until decoding is complete, until the decoding is completed.) DA1=0x02, control the barcode reader on (open decode, timeout)

  • Page 61: Instruction Save

    1D Barcode Scanner Setting Manual V1.10 Instruction save When the user sends a set barcode reader parameter using an instruction, after sending the setup instruction, an instruction to save the parameter needs to be sent to save the current parameter. (Open and close instructions do not need to be saved) DA4~DA10 DA11 00H~00H...

  • Page 62: Instruction Feedback Setting

    1D Barcode Scanner Setting Manual V1.10 Instruction Feedback Setting After the setup response is turned on (scan code 02421, or serial port send command is enabled), if the setup command is executed successfully, it will respond with a response character ACK (ASCII code 0x06). If it can't be executed successfully, it will answer a NAK (ASCII code) 0x15.

  • Page 63: Trigger Instruction

    1D Barcode Scanner Setting Manual V1.10 Trigger instruction Turn on scan：02 01 01 02 B8 0B 00 00 00 00 00 00 00 00 03 34 Turn off scan：02 01 01 00 00 00 00 00 00 00 00 00 00 00 03 F9 Case Analysis Close decoding CMD=0x01,...
  • Page 64 1D Barcode Scanner Setting Manual V1.10 Set instruction code：000709 CMD=0x02, DA0=0x07, DA1=0x82, DA2~DA7=000709=0x30,0x30,0x30,0x30,0x37,0x30,0x39 a=(8+3+3+3+3+3+3)*16+(2+2+7+2+9+5+3)*1=448=0x1c0 SUM=256-(0x1c0&FF)=256-( 111000000&11111111)=256-192=64=0x40 STX CMD DA0 DA1 DA2 DA3 DA5 DA6 DA7 DA8~DA11 ETX SUM 07H 82H 30H 30H 37H 39H 35H 00H~00H Hexadecimal instructions：02 02 07 82 30 30 30 37 30 39 00 00 00 00 03 40 Add carriage return line feed Set instruction code : 0213@\r\n CMD=0x02,...

  • Page 65: Instruction Sending Example

    1D Barcode Scanner Setting Manual V1.10 Instruction sending example Send a hexadecimal command to control the scan. Use the instruction to open the decode timeout for 3 seconds to confirm the serial port protocol setting. Enter the corresponding command in the command sending input box. Note: For detailed instructions, please refer to "Appendix - Instruction Set"...

  • Page 66: Chapter6 Appendix

    1D Barcode Scanner Setting Manual V1.10 Chapter6 Appendix Appendix - Default Settings Sheet Parameter name Default setting Instruction Remark Comprehensive settings Setting code function Default on Send setup code Default off Reading mode Manual reading Decoding sound Open Sound frequency IF-loud Sound frequency 2.0KHZ...
  • Page 67 1D Barcode Scanner Setting Manual V1.10 Send Code ID Send a custom prefix Send a custom suffix End of transmit suffix Allow, Enter Character conversion Normal...
  • Page 68 1D Barcode Scanner Setting Manual V1.10 Parameter name Default setting Instruction remark Barcode parameter settings UPC-A Enable Transmit Check Digit Enable 2-Digit add-on Code Enable 5-Digit add-on Code 2-Digit Add-on Code Required 5-Digit Add-on Code Required Transfer system character Barcode information expanded to EAN-13 UPC-E Enable...
  • Page 69 1D Barcode Scanner Setting Manual V1.10 Required Transfer system character Expanded to UPC-A When expanding, the type is converted to UPC-A EAN-8 Enable Transmit Check Digit Enable 2-Digit add-on Code Enable 5-Digit add-on Code 2-Digit Add-on Code Required 5-Digit Add-on Code Required Transfer system character EAN-13...
  • Page 70 1D Barcode Scanner Setting Manual V1.10 5-Digit Add-on Code Required Expand to ISBN Code 128 Enable Transmit Check Digit Code 39 Enable Transmit Start/Stop Character Enable Code 39 Full ASCII Code 93 Enable Transmit Check Digit Code 11 Enable Check Transmit Check Digit C 校验...
  • Page 71 1D Barcode Scanner Setting Manual V1.10 Industrial 2 of 5 Enable Standard 2 of 5 Enable Codabar Enable Transmit Start/Stop Character Plessey Enable MSI Plessey Enable RSS Limited Enable RSS Omnidirectional Enable China Post Enable Add-on Code Enable add-on Code Add-on Code Required...

  • Page 72: Appendix -Code Id

    1D Barcode Scanner Setting Manual V1.10 Appendix -Code ID Barcode type Code ID Code Barcode type code（Suffix All Barcode CODE 128 EAN 8 EAN 13 UPC-A UPC-E CODE 93 GS1 Omnidirectional GS1 Limited CODE 39 Interleaved 2 of 5 Industrial 2 of 5 Standard 2 of 5 Matrix 2 of 5 China Post...

  • Page 73: Appendix - Instruction Set

    1D Barcode Scanner Setting Manual V1.10 Appendix - Instruction Set Function instructions Hexadecimal instructions 1. Turn scanning without 02 01 01 01 00 00 00 00 00 00 00 00 00 timeout 00 03 F8 2. Turn on scanning timeout 3 02 01 01 02 B8 0B 00 00 00 00 00 00 00 seconds 00 03 34...
  • Page 74 1D Barcode Scanner Setting Manual V1.10 Barcode Data ent 00 03 7A 02 02 07 82 30 31 33 33 30 30 00 00 00 11.Trigger Mode 013300 00 03 49 02 02 07 82 30 31 33 33 30 34 00 00 00 12.Continuous scanning mode 013304 00 03 45...
  • Page 75 1D Barcode Scanner Setting Manual V1.10 00 03 30 02 02 07 82 30 31 34 32 30 31 00 00 00 22.Enable decoding sound 014201 00 03 48 02 02 07 82 30 31 34 32 30 30 00 00 00 23.Turn off decoding sound 014200 00 03 49...
  • Page 76 1D Barcode Scanner Setting Manual V1.10 00 03 46 02 02 07 82 30 30 31 35 30 36 00 00 00 33.slowest transmit speed 001506 00 03 44 02 02 06 82 30 30 31 36 31 00 00 00 00 34.Normal image recognition 00161 00 03 79...
  • Page 77 1D Barcode Scanner Setting Manual V1.10 00 03 45 02 02 07 82 30 30 30 37 30 35 00 00 00 44.Baud rate 9600bps 000705 00 03 44 02 02 07 82 30 30 30 37 30 36 00 00 00 45.Baud rate 19200bps 000706 00 03 43...
  • Page 78 1D Barcode Scanner Setting Manual V1.10 and the instruction is：02 02 07 82 30 32 32 31 34 32 00 00 00 00 03 45 02 02 06 82 30 32 32 30 30 00 00 00 00 54.Clear all suffixes 02200 00 03 7D 02 02 07 82 30 32 33 34 30 31 00 00 00...
  • Page 79 1D Barcode Scanner Setting Manual V1.10 00 03 48 65.Hiding the middle of the first 02 02 07 82 30 32 34 30 30 31 00 00 00 024001 00 03 49 character begins 66.Hiding the middle of the 02 02 07 82 30 32 34 30 30 32 00 00 00 024002 00 03 48 second character starts...
  • Page 80 1D Barcode Scanner Setting Manual V1.10 02 02 07 82 30 32 33 39 30 33 00 00 00 75.Hide the middle 3 characters 023903 00 03 3F 02 02 07 82 30 32 33 39 30 34 00 00 00 76.Hide the middle 4 characters 023904 00 03 3E...
  • Page 81 1D Barcode Scanner Setting Manual V1.10 02 02 06 82 30 32 31 30 40 00 00 00 00 86.None 0210@ 00 03 6E 02 02 06 82 30 32 35 31 30 00 00 00 00 87.Character conversion -Normal 02510 00 03 79 02 02 06 82 30 32 35 31 31 00 00 00 00...
  • Page 82 1D Barcode Scanner Setting Manual V1.10 97.UPC-A Barcode information 02 02 06 82 30 30 33 39 31 00 00 00 00 00391 00 03 74 extension 98.UPC-A Barcode information 02 02 06 82 30 30 33 39 30 00 00 00 00 00390 00 03 75 does not expand...
  • Page 83 1D Barcode Scanner Setting Manual V1.10 information does not expand 02 02 06 82 30 30 33 37 31 00 00 00 00 107. Enable EAN-8 00371 00 03 76 02 02 06 82 30 30 33 37 30 00 00 00 00 108.
  • Page 84 1D Barcode Scanner Setting Manual V1.10 00 03 74 118. EAN-13 Do not Extended 02 02 06 82 30 30 34 38 30 00 00 00 00 00480 to ISBN 00 03 75 02 02 06 82 30 31 35 30 31 00 00 00 00 119.
  • Page 85 1D Barcode Scanner Setting Manual V1.10 128. Code 39 Disable Code 39 02 02 06 82 30 30 32 33 30 00 00 00 00 00230 00 03 7C Full ASCII 02 02 06 82 30 30 36 32 31 00 00 00 00 129.
  • Page 86 1D Barcode Scanner Setting Manual V1.10 02 02 06 82 30 30 39 36 30 00 00 00 00 139. Disable Interleaved 2 of 5 00960 00 03 72 02 02 06 82 30 31 34 36 31 00 00 00 00 140.
  • Page 87 1D Barcode Scanner Setting Manual V1.10 02 02 06 82 30 31 31 36 31 00 00 00 00 150. Enable Plessey 01161 00 03 78 02 02 06 82 30 31 31 36 30 00 00 00 00 151. Disable Plessey 01160 00 03 79...
  • Page 88 1D Barcode Scanner Setting Manual V1.10 161. Enable5-Digit add-on 02 02 06 82 30 30 35 35 32 00 00 00 00 00552 00 03 75 Code 162. Enable 2-Digit or 5-Digit 02 02 06 82 30 30 35 35 33 00 00 00 00 00553 00 03 74 add-on Code...

  • Page 89: Appendix - Character Table (For Adding Suffixes)

    1D Barcode Scanner Setting Manual V1.10 Appendix - Character Table (for adding suffixes) 1001 1002 1003 SOH（01） STX（02） ETX（03） 1004 1005 1006 EOT（04） ENQ（05） ACK（06） 1007 1008 1009 BEL（07） Backspace（08） HT （09） 1010 1011 1012 LF（0A） VT（0B） FF（0C） 1013 1014 1015 CR（0D）...
  • Page 90 1D Barcode Scanner Setting Manual V1.10 1025 1026 1027 EM（19） SUB（1A） ESC（1B） 1028 1029 1030 FS（1C） GS（1D） RS（1E） 1031 1032 1033 US（1F） Space（20） !（21） 1034 1035 1036 “ （22） #（23） $（24） 1037 1038 1039 ‘ %（25） &（26） （27） 1040 1041 1042 (（28）...
  • Page 91 1D Barcode Scanner Setting Manual V1.10 1049 1050 1051 1（31） 2（32） 3（33） 1052 1053 1054 4（34） 5（35） 6（36） 1055 1056 1057 7（37） 8（38） 9（39） 1058 1059 1060 （3A） ;（3B） <（3C） 1061 1062 1063 =（3D） >（3E） （3F） 1064 1065 1066 @（40） A（41）...
  • Page 92 1D Barcode Scanner Setting Manual V1.10 1073 1074 1075 I（49） J（4A） K（4B） 1076 1077 1078 L（4C） M（4D） N（4E） 1079 1080 1081 O（4F） P（50） Q（51） 1082 1083 1084 （52） S（53） T（54） 1085 1086 1087 U（55） V（56） （57） 1088 1089 1090 X（58） Y（59）...
  • Page 93 1D Barcode Scanner Setting Manual V1.10 1097 1098 1099 a（61） b（62） c（63） 1100 1101 1102 d（64） e（65） f（66） 1103 1104 1105 g（67） h（68） i（69） 1106 1108 （6A） k（6B） l（6C） 1109 1110 1111 m（6D） n（6E） （6F） 1112 1113 1114 p（70） q（71） r（72）...
  • Page 94 1D Barcode Scanner Setting Manual V1.10 y（79） z（7A） {（7B） 1124 1125 1126 |（7C） }（7D） ~（7E） 1127 1128 1129 Delete（7F） 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 Insert Home 1142 1143 1144 Page up Delete 1145 1146 1147 Page arrow...
  • Page 95 1D Barcode Scanner Setting Manual V1.10 1148 1149 Down arrow Up arrow...

  • Page 96: Appendix - Ascii Code Table

    1D Barcode Scanner Setting Manual V1.10 Appendix - ASCII code table Hexadecimal ASCII value character NUL (Null char.) SOH (Start of Header) STX (Start of Text) ETX (End of Text) EOT (End of Transmission) ENQ (Enquiry) ACK (Acknowledgment) BEL (Bell) BS (Backspace) HT (Horizontal Tab) LF (Line Feed)
  • Page 97 1D Barcode Scanner Setting Manual V1.10 DC2 (Device Control 2) DC3 (XOFF) (Device Control 3)（XOFF） DC4 (Device Control 4) NAK (Negative Acknowledgment) SYN (Synchronous Idle) ETB (End of Trans. Block) CAN (Cancel) EM (End of Medium) SUB (Substitute) ESC (Escape) FS (File Separator) GS (Group Separator) RS (Request to Send)
  • Page 98 1D Barcode Scanner Setting Manual V1.10 十六进制 ASCII 值 字符 $ (Dollar Sign) % (Percent) & (Ampersand) ` (Single Quote) ( (Right / Closing Parenthesis) ) (Right / Closing Parenthesis) * (Asterisk) + (Plus) , (Comma) - (Minus / Dash) .
  • Page 99 1D Barcode Scanner Setting Manual V1.10 : (Colon) ; (Semi-colon) < (Less Than) = (Equal Sign) > (Greater Than) ? (Question Mark) @ (AT Symbol)
  • Page 100 1D Barcode Scanner Setting Manual V1.10 十六进制 ASCII 值 字符 [ (Left / Opening Bracket) \ (Back Slash) ] (Right / Closing Bracket) ^ (Caret / Circumflex) _ (Underscore) ' (Grave Accent)
  • Page 101 1D Barcode Scanner Setting Manual V1.10...
  • Page 102 1D Barcode Scanner Setting Manual V1.10 十六进制 ASCII 值 字符 { (Left/ Opening Brace) | (Vertical Bar) } (Right/Closing Brace) ~ (Tilde) DEL (Delete)

Table of Contents