Loading Continuous Paper With The Front Push Tractor - Epson FX-1180 Quick Reference Manual

Loading Continuous Paper With the Front Push Tractor

To load continuous paper in the front push tractor, follow these steps.
1
1
Turn off the printer, then remove the
front cover.
Make sure the left and right sprockets are
positioned properly for your paper's
width.
2
2
2
Open both sprocket covers, and fit the
first four holes of the paper, printable
side up, over the tractor pins. Then
close the sprocket covers.
Note:
Load continuous paper that has a clean,
straight edge to avoid paper jams.
If you load continuous paper of a
different size or thickness, adjust the
position of the sprockets or change the
paper thickness lever setting. See
Chapter 3 of the User's Guide for
instructions.