Connections
●
External equipment and cables shown are not
supplied with this TV.
●
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
●
Check the terminal type and cable plugs are correct
when connecting.
●
Use a fully wired HDMI compliant cable.
●
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
●
Please also read the manual of the equipment being
connected.
Terminals
1
5
6
1 SD Card slot
2 USB 1 - 3 port
3 HDMI1 - 3
(p. 10, 11)
4 DIGITAL AUDIO OUT
5 ETHERNET
(p. 10)
6 Aerial terminal
(p. 9)
7 AV (COMPONENT / VIDEO)
8 HDMI4
2
3
4
7
8
(p. 10)
Basic connections
■
Mains lead
Mains lead
Cable tie (Bundled the mains lead)
To loosen:
Keep pushing the knob
Knob
To remove from the TV:
Snaps
Keep pushing both side snaps
The removed cable tie can be used to bundle other
connected cables.
(p. 11)
■
Aerial
TV
RF cable
Aerial
●
For Digital TV, Analogue TV
●
Keep RF (aerial) cable away from the mains lead to
avoid and minimise mains interference pickup.
●
Do not place the RF cable under the TV.
An aerial, correct cable (75 Ω coaxial) and correct
●
terminating plug are required to obtain optimum
quality picture and sound.
●
If a communal aerial system is used, you may require
the correct connection cable and plug between the
wall aerial socket and the TV.
●
Your local Television Service Centre or dealer may
be able to assist you in obtaining the correct aerial
system for your particular area and the accessories
required.
AC 220-240 V
50 / 60 Hz
9
English