Page 1
INSTRUCTION MANUAL - IN-COLUMN WINE COOLER -BUILT-IN WINE COOLER ART29611 BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Page 2
Important Safeguards • Never use an appliance with a damaged circuit. When using an electrical appliance, basic precautions should • Ensure that the ventilation openings to and from a built- always be followed to reduce the risk of fire, electric shock, and in appliance are never blocked or covered.
• The appliance must not be disposed of in the dustbin or with your socket, remove it and replace it with an appropriate type. normal household rubbish. Dispose of the old plug safely. • The coolant circuit, particularly the heat exchanger at the back/ As the colors of the wires in the mains lead of this appliance bottom of the unit, must not be damaged.
Page 4
Digital Control Panel Cabinet Door Handle Shelves Bottom Shelf Adjustable Legs Features of Your Wine Cooler Model ART29611 Handle Door Shelf(Total 3) Condenser Cabinet Leveling Leg Model ART29611 Door Handle Digital Control Panel Full Shelves (Total 5) Half Shelf Condenser Cabinet Leveling Leg...
Digital Control Panel Cabinet Door Handle Shelves Bottom Shelf Adjustable Legs Features of Your Wine Cooler (Built-in) • Plug the Wine Cooler into an exclusive, easily accessible plug socket. Any questions concerning power and/or earthing should Installation Instructions be directed towards a qualified electrician or an authorized Before Using Your Wine Cooler products service centre.
Attention • Store wine in sealed bottles. • Do not overload the cabinet. • Do not open the door unless necessary. • Do not cover shelves with aluminum foil or any other shelf material which may prevent air circulation. • Should the wine cooler be left empty for long periods it is suggested that the appliance is unplugged, and after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet in order to avoid possible condensation, mold or odors...
that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord. Electrical fuse protection of at least 10 amperes must be provided.
Page 8
To set or view the internal temperature setting for each zone. Use and Control - ART29611 LIGHT The Controls of Your Wine Cooler To control the inner light turn on/off. Used to raise (warm) the set temperature by 1°C or 1ºF.
LED indicator for LOWER ZONE will flash. Then proceed to touch the UP or DOWN marks to set the desired temperature for the LOWER ZONE. or from Celsius to Fahrenheit, touch and hold button the for 5 The temperature will increase 1°C or 1ºF if you seconds.
gure 1 Figure 2 4. Turn around the glass door 180° and reinstall it. Temperature Display During normal operation, the temperature display on the control panel shows the temperature inside the appliance. The tempera- ture display will flash if - A different temperature is being set, - The temperature in the zone deviates by more than 5°C from the set temperature.
Page 11
Clean the shelves with a gentle detergent then dry with a soft dry cloth. At the moment of the first use, some odours can persist. In this case, make functioning the appliance at the coldest tempera- tures, empty, during a few hours. The cold will cancel all these possible odours.
IN CASE OF BREAKDOWN sed an equivalent product to the store where the new appliance has been bought. The user is responsible for making sure that Despite the care we bring to our production, a breakdown can the appliance is given to the appropriate structure. A selective never be totally excluded.
Need help?
Do you have a question about the ART29611 and is the answer not in the manual?
Questions and answers