Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Total TD614006
Summary of Contents for Total TD614006
- Page 1 MIXER...
-
Page 2: Security Instructions
Security instructions Caution Read all safety warnings and all instructions. Failure to follow warnings and instructions can cause electric shock, fire, and / or serious injury. Note: Save all warnings and instructions for future reference. 1) Work area safety a. Keep the work area clean and well lit to avoid accidents. b. - Page 3 b. Do not use the power tool if its ignition switch does not work. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool to avoid accidentally starting the tool.
-
Page 4: Additional Safety Warnings
Additional safety warnings • Wear ear protectors. Exposure to noise can cause hearing loss. • Always route the cable to the rear, away from the machine. • Do not carry the machine by the cable. • When working with the machine, always hold it firmly with both hands and stand firm. -
Page 5: Product Description
Product description The machine has been designed to mix liquid and powder building materials such as paint, mortar, adhesive, plaster and similar substances. The relevant mixing action (which depends on the consistency of the materials and the amount to be mixed) must be set for the appropriate mixing tool. -
Page 6: Operating Modes
Operating modes Before initial operation check whether the rated frequency of the power supply corresponds to the details of the type place. Before using the tool, please read the instruction book carefully. start Make sure the data listed on the nameplate matches the mains voltage before connecting the unit. -
Page 7: Maintenance
Speed should only be maximized after it has been fully immersed in the mix, to • ensure the motor stays as cool as possible. The machine must move within the mixing container during the mixing process. • Continue the mixing process until all components of the mixture have been •... -
Page 8: Problem Solving
Problem solving Possible problem Possible reason Solution The operation switch is The cables from the mains have the plug and socket on, but the motor does not plug or socket are loose checked or repaired work. The switch is faulty Replace switch The switch contact has replace switch... -
Page 9: Exploded View
Exploded view... - Page 10 MIXER...
Need help?
Do you have a question about the TD614006 and is the answer not in the manual?
Questions and answers