Page 2
Precautions Do never blow into the RM 15G and always use a pop-filter when there is a risk of strong air movements. Do never apply phantom power to the RM 15G since this can burn the ribbon.
Page 3
Specifications - Ribbon type: Pure aluminum 2,5 microns tick, 35 mm (L) x 5 mm (W) - Polar pattern: Figure-8 - Sensitivity: - 54 db - Frequency response: 30 Hz – 15 kHz - Impedance: 600 Ohm - Recommended load impedance: 3000 Ohm - Max SPL (1% THD@ 1 kHz): 148 db - Self noise (EIN / IEC 268-4 A weighted): 18 db...
Need help?
Do you have a question about the RM 15G and is the answer not in the manual?
Questions and answers