Advertisement
6170 BT Prelude 20 UG [2]
Pairing
6
Before using your BT Prelude Headset, you must 'pair' it to a Bluetooth phone or other
compatible device.
1. Make sure your BT Prelude headset battery is fully charged.
2. Make sure your headset is switched off.
3. Press and hold the
6 seconds). Your headset is now in pairing mode and will remain so for 1 minute.
4. If pairing with a BT Prelude phone:
The BT Prelude phone is always in Bluetooth reception mode. The phone's screen should
list the BT Prelude 20 Headset as
8888888888888888
All manuals and user guides at all-guides.com
14/6/04
4:07 pm
BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170
button until the light flashes green and red alternately (after about
TECOM BT3061
09 : 22
20 03
Page 6
.
Advertisement
