INSTRUCTIONS
PORTABLE MINI LED
FLOODLIGHT MEGA-LUX
COMPONENTS
•
LED floodlight
•
USB cable
TECHNICAL SPECIFICATIONS
•
Input voltage: 5 V
•
Luminous flux: 400 lm
•
Material: ABS
•
Light emitting angle: 120 degrees
•
Product weight: 250 g
•
Product size: 135 × 100 × 40 mm
•
Ingress protection rating: IP44
•
Color temperature 6,500K (cold white)
•
Power: 20 W
•
Working time: 8–12 hours
•
Charging time: 4–6 hours
•
Battery power: 2× 18650 battery / 4× AA
battery
•
Mode: full brightness / low brightness /
flashing
COMPONENTS
(1)
Battery cover
(2)
Battery compartment
(3)
Adjustable handle
(4)
Charging port cover
(5)
Power button
(6)
Indicator light
(7)
Charging input port
(8)
USB output port
OPERATION INSTRUCTIONS
NOTE: Before using the floodlight for the first time,
insert fully charged rechargeable batteries or 4 new
AA batteries.
1. To adjust the angle of the floodlight, pull on
the handle, and set it to one of the seven
detent positions.
2. Press the power button on the back to
select from four operating modes: high,
low, flashing, and OFF.
3. When finished using the floodlight, store
indoors and away from children.
CHARGING INSTRUCTIONS
CAUTION! Do not leave the floodlight unattended
while charging. Charging should be done by adults
only.
WARNING! Charge on a non-flammable surface in a
well-ventilated area. Do not use the floodlight while
it is being charged.
NOTE: Before using the floodlight for the first time,
fully charge the batteries.
1. Open the charging port cover on the back
of the floodlight and plug the micro USB
connector on the supplied USB cable into
the charging input port. Plug the other end
of the cable into a USB port of a computer
or any other USB power source or adaptor
to begin charging.
2. The charging indicator light will turn on.