Advertisement
Image Graphics Quick Start Guide
Thank you for purchasing a Datapath Image
Graphics card. The aim of this document is
to quickly guide you through the process of
initial setup.
For detailed information, the User
Guide can be downloaded from
www.datapath.co.uk.
CONTENTS
Your packing box contains the following items:
Your Image graphics card
Image2K - DGC223 or,
Image4K - DGC215
For latest drivers go to www.datapath.co.uk.
Note: All Products are static sensitive and
are packed in antistatic materials. Please
keep the card in its packaging until you are
ready to install.
Image2K
STEP 1 - HARDWARE
INSTALLATION
Installing your Image graphics card is a simple
process. In summary, the following steps need to
taken to be up and running in a few minutes:
1. Ensure that the Windows® System is set to standard
single screen VGA resolution.
2. Locate a vacant PCI Express (x8 electrical, x16
physical) slot on the motherboard and remove
the blanking plate. Retain all screws.
3. Ensure the required software has been installed
(see software installation section).
4. Right click on the desktop and select the Display
Driver Configuration Tool (DDCT) from the menu.
Follow the instructions to configure your displays.
Full details of the DDCT can be found in application
help file and the Image card User Guide located on
the Datapath website.
www.datapath.co.uk
Image4K
Advertisement
