Advertisement
Quick Links
Advertisement
Summary of Contents for Brickhouse Security JumpStart Solo
- Page 1 JumpStart Solo User’s Guide...
-
Page 2: Package Content
Package Content • 1x JumpStart Solo, Car Jump Starter • 1x Smart Clamps • 1x USB Micro Cable • 1x User Manual... - Page 3 Smart Clamps JumpStart Solo...
-
Page 4: Operation
Operation Please read this manual carefully before operating the JumpStart Solo. Press the power button lightly to check the remaining battery capacity. Indicator lights 4 OFF 1 Solid ON Battery While the jump starter is being charged, the indicator lights will flash one by one until it reaches maximum charge. All 4 indicator lights will stay on... - Page 5 2 Solid On 3 Solid On 4 Solid ON 100%...
- Page 6 How to Jump Start a Vehicle Battery: 1. Make sure the battery capacity of the jump starter is above 25% (At least one indicator light stays ON). 2. Connect the jump start cable to the proper socket of the jump starter. 3.
- Page 7 Recommended Vehicle Engine Displacements for Jump Starting: 1. Insert the plug of the smart clamp completely into the jump starter, and the green light will flash. 2. Correctly clip the red and black clamps to the electrodes of the car battery (Red to positive and black to negative). 3.
- Page 8 How to Turn On the LED Light: Press and hold the power button for 3 seconds to turn on the LED light. Once the LED light is turned on, pressing the power button will cycle through additional modes. (Solid light --> Strobe light --> SOS flashing --> OFF) Charging Mobile Electronic Device: 1.
-
Page 9: Specifications
How to Charge the Jump Starter: Connect the Included Micro USB Cable into a 5v adapter (not included), then insert the cable into the micro USB port of the device. WARNING! Any other chargers may cause possible damage and/or reduce the service life of the jump starter. Specifications Input: 5V/1.5A Output: 5V/2.1A...
Need help?
Do you have a question about the JumpStart Solo and is the answer not in the manual?
Questions and answers