1. Manuals
  2. Brands
  3. Kvadrat Manuals
  4. Household Hardware
  5. Sonesse 40 I/O
  6. Manual

Kvadrat Sonesse 40 I/O Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

Motor guide
Sonesse
40 I/O, RTS and WT
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sonesse 40 I/O and is the answer not in the manual?

Questions and answers

Related Manuals for Kvadrat Sonesse 40 I/O

Summary of Contents for Kvadrat Sonesse 40 I/O

  • Page 1 Motor guide Sonesse 40 I/O, RTS and WT ®...
  • Page 2 Contents 1. Sonesse® 40 I/O and Sonesse® 40 RTS 2. Sonesse® 40 WT...

  • Page 3: Installation

    Introduction to our range Sonesse 40 I/O ® The Sonesse® 40 range is putting window coverings in motion Sonesse® 40 I/O is made for interior applications, with quiet precision. With our standard products listed below, including roller blinds, and is designed to operate quietly. we offer motors for all voltages and electrical frequencies.

  • Page 4: Technical Data

    Operating instructions for Sonesse 40 I/O and RTS ® The Sonesse 40 I/O motor can only be operated by an I/O remote control and/or wall panel. The Sonesse 40 RTS motor can only be operated by an RTS remote control and/or wall panel.
  • Page 5 Replacing a lost remote control Adjusting the upper and lower limits Please note that these steps reset/delete all remote controls (only when the channel is chosen) programmed for the motor. However, upper and lower limits To adjust the upper limit, press the UP button to move the as well as the favourite position are retained.
  • Page 6 Environment Erasing the motor memory Please note that these steps reset/delete all remote controls, upper and lower limits as well as favourite position. Damaged electrical products and batteries should not be disposed of with normal household waste. They should be N.B.
  • Page 7 Sonesse 40 WT Operating instructions ® – To move the blind from one level to another, briefly press the UP or DOWN button on the wired wall switch. – To stop the shade, press the STOP button on the control point. Sonesse®...

  • Page 8: Troubleshooting

    Troubleshooting The motor does not work Check: – The wiring of the motor. – The power supply specifications. – The heat generated (wait for the motor to cool down – this can take up to 20 min.). The equipment stops too soon Check: –...

This manual is also suitable for:

Sonesse 40 rtsSonesse 40 wt

Table of Contents