Loading/Removing A Memory Card - Huawei U3311 User Manual

Loading/Removing a Memory Card

charged normally, replace it with a battery
of the same type.
• Do not strike, throw or cause any kind of
violent shock to the battery, otherwise liq-
uid leakage, body damage, overheating,
explosion or fire may occur.
• Charge the battery by using the charger
supplied with your phone.
Charging with a Cable Charger
Before charging the battery with a cable charger,
ensure that the battery has been properly loaded into
your phone.
To charge the battery, do as follows:
1
* Insert the plug of the charger into the connector
of the phone as shown in the following figure.
2
Plug in the connector of the charger to a power
socket.
With the metallic conect
downward
8
?t*The plug of the charger is in trapezium
Note
shape. Reversely inserting the plug may
damage the mobile phone and charger.
The connection methods of USB data
cable and headset are the same as the
charger.
?tWhen the battery power level is very low,
the phone makes alert sounds and dis-
plays a prompt. When the battery power
level is too low, the phone will power off
automatically.
• When the battery is being charged, the
charging indicator blinks continuously.
When the charging indicator stops blink-
ing, it indicates that the battery is full.
Loading/Removing a Memory Card
Your phone supports a memory card (micro-SD) with
a capacity up to 2 GB.
1
Insert the memory card into the slot, as shown in
the following figure.