Subscribe to Our Youtube Channel
Summary of Contents for Engler 121819
- Page 1 Engler Water Circulator Pump Engler Engineering Corporation 1099 East 47 Street Hialeah, Florida 33013 305-688-8581 / 800-445-8581 www.engler411.com / www.dynaxusa.com Rev C 12/19...
-
Page 2: Table Of Contents
UNDERSTANDING THE CONTROLS ..................8 CONTROL UNIT / REMOTE OPERATION ................8 USAGE NOTES AND “DO’S AND DON’TS” ................10 TROUBLESHOOTING ......................12 PARTS AND ACCESSORIES INCLUDED WITH THIS SHIPMENT ........13 ENGLER WATER CIRCULATOR WARMING PUMP SPECIFICATIONS ....... 13... -
Page 3: Company Profile
We also acquired the Alpha-Sonic, Ora-Sonic, and Pro-Sonic line of piezo scalers. Engler manufactures all of the inserts and tips used in the Engler products as well as many others on the market today in the 18K and 25K frequency range. -
Page 4: Engler Engineering Corporation's
Engler Piezo Ultrasonic Scaler Electro - Son, touch screen, mono / bi-polar electrosurgical unit Poli - X, 35,000 RPM handpiece / low speed polisher Sentinel V.R.M., respiratory monitor Engler Veterinary Respiratory Monitor (EVRM) More coming soon! -
Page 5: Why Use A Warm Water Circulator
The Engler Warm Water Circulator is easy to set up and operate, just connect the Engler Circulator pad, fill the reservoir with distilled water. Set the temperature on the digital touchpad and know that your patients will be warm and comfortable during and after surgery. -
Page 6: Circulator Unit And Circulator Pad
CIRCULATOR UNIT AND CIRCULATOR PAD INSTALLATION INSTRUCTIONS Connecting the water hose to the pump and pad... -
Page 7: The Control Panel
THE CONTROL PANEL FILLING THE RESERVOIR For best results, Engler recommends using only distilled water. Remove the reservoir cover. Using the sight glass as a guide, fill the reservoir with clean distilled water. Take care not to overfill. Should the reservoir drop to 2/3, a WARNING LIGHT will illuminate on the CONTROL PANEL. -
Page 8: Understanding The Controls
UNDERSTANDING THE CONTROLS CONTROL UNIT / REMOTE OPERATION On / Off - This button turns the circulator on or off. Up / Down - Confirm the reservoir is full. Turn the circulator on. Press the Up / Down button to set the temperature Moon –... - Page 9 1. Confirm that the remote control unit has fresh batteries. 2. Unplug the power cord of the Engler Warm Water Circulator from the electric outlet. 3. Plug the Warm Water Circulator unit back in, then press the temperature down button (▼) and hold it until numbers appear on the display.
-
Page 10: Usage Notes And "Do's And Don'ts
It is recommended that a thick towel or blanket be used to prevent direct patient contact with the vinyl pad. Engler Engineering offers a Fleece Bag in all three sizes to fit the pads. They are designed to prevent direct patient contact with the pad and prevents scratches and punctures due to sharp nails or instruments. - Page 11 Should the circulator accumulate dust or dirt around the fan intake, remove the fan cover to wash, then dry. Replace the fan cover when dry. Every Engler Warm Water Circulator comes equipped with a special plastic “key” for allowing water to be drained from the circulator unit and / or circulator pad.
-
Page 12: Troubleshooting
(Large pad may not achieve max temp.) Blows fuses frequently. Water or some other foreign substance got into circulator unit. Circulator unit emitting an unusual smell If these conditions occur, unplug the circulator and call Engler Engineering Corp. 305-688-8581 or 800-445-8581... -
Page 13: Parts And Accessories Included With This Shipment
14”(W) X 11.5”(D) X 9”(H) PLEASE READ VERY CAREFULLY Engler Engineering Corporation (EEC) makes every effort to verify that all parts for this device including any optional accessories ordered with it are included in this shipment. It is imperative that you inspect the package and if you find any parts damaged or missing, you must notify us immediately.
Need help?
Do you have a question about the 121819 and is the answer not in the manual?
Questions and answers