iCleanse Swift 5x User Manual
  1. Manuals
  2. Brands
  3. iCleanse Manuals
  4. Steriliser
  5. Swift 5x
  6. User manual

iCleanse Swift 5x User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Guide for your Swift 5x

Advertisement

Table of Contents
loading

Summary of Contents for iCleanse Swift 5x

  • Page 1 User Guide for your Swift 5x...

  • Page 2: Table Of Contents

    Meet your iCleanse Swift 5x Indicators Tech Specs Getting Started Setting up your Swift 5x Admin Mode Using and Maintaining your Swift 5x Guidelines for Use Disinfecting Devices Lamp Status & Replacement Resetting the Lamp Cycle Counter Troubleshooting Warranty and Registration...

  • Page 3: About Your Icleanse Swift 5X

    About your iCleanse Swift 5x Important Safety Instructions READ ALL INSTRUCTIONS BEFORE USING THIS DEVICE CAUTION: This device emits ultraviolet radiation. The device has been designed to contain UV exposure. Do not attempt to make modifications to the device or attempt to look directly at the UV lamps while it is in operation. UV light can cause discoloration with continuous exposure to plastic devices that are white or light in color.

  • Page 4: Meet Your Icleanse Swift 5X

    The Swift 5x has been designed for minimal contact with what you place in it, allowing maximum surface coverage by germicidal light during the disinfection cycle. Please read through this guide thoroughly to ensure proper use of your Swift 5x.

  • Page 5: Indicators

    About your iCleanse Swift 5x Indicators The iCleanse Swift 5x has an easy-to-use interface. Below are the various lighted buttons and their functions. Cycle Time Remaining Progress Bar: Shows the remaining time in the disinfection cycle. Admin Mode: Illuminates when you are in administrator mode.
  • Page 6 About your iCleanse Swift 5x Cycle Time Remaining Progress Bar Disinfection is complete when all lights in the progress bar are no longer lit Tray Information Provides status of each individual tray Lock Light Indicates when the unit is locked...

  • Page 7: Tech Specs

    Getting Started Tech Specs Model Swift 5x Dimensions 15.5 in x 17.5 in x 17.75 in / 39.4 cm x 44.5 cm x 45 cm Weight 46 lbs / 20.8 kg Basket Accommodations 8.5 in x 11 in x .75 in / 22 cm x 28 cm x 2 cm Disinfection Cycle Time Set at Factory —...

  • Page 8: Setting Up Your Swift 5X

    Getting Started Setting up your Swift 5x Ensure the Swift 5x unit is on a level surface and has 3 to 4 inches of open space behind it to allow for proper airflow for the cooling fan. Plug in the power cord to any standard outlet and power in the unit by using the...

  • Page 9: Admin Mode

    Admin mode will also exit after 60 seconds of inactivity. PIN Management There are two types of PINs stored in the iCleanse’s memory — administrator PINs and user PINs. The unit must be in admin mode to make these changes.

  • Page 10: Using And Maintaining Your Swift 5X

    Using and Maintaining your Swift 5x Guidelines for Use Non-Critical Devices: iCleanse Swift 5x units should be used on devices classified as non-critical. “Non-Critical” medical devices are devices that are in contact with unbroken skin only. General Purpose Disinfection: This is described as a germicide intended to process non-critical medical devices and equipment surfaces.

  • Page 11: Disinfecting Devices

    Using and Maintaining your Swift 5x Disinfecting There are three ways to disinfect with your Swift 5x. Method 1: Dock, charge, disinfect multiple devices at once. Step 1: Open a tray and place your device in the basket. Step 2: To charge the device, plug into the USB port at the back of the tray. Please note that USB charging cables are not provided.
  • Page 12 Using and Maintaining your Swift 5x Step 3: Press and hold the number on the keypad that corresponds to the tray you are disinfecting to start a disinfection cycle. Step 4: Wait for the disinfection cycle to complete. Step 5: Open the tray and remove the disinfected device.

  • Page 13: Lamp Status & Replacement

    Each set of lamps has a lifespan of 4,000 cycles. When lamps reach 500 cycles remaining, the Service lamps light will turn on. When there are 0 cycles remaining you can no longer run a disinfection cycle. To learn how to replace your lamps go to: www.icleanse.com/support.

  • Page 14: Resetting The Lamp Cycle Counter

    Using and Maintaining your Swift 5x Resetting the Lamp Cycle Counter After replacing the lamps follow this procedure to reset the lamp cycles to 4,000. Step 1: Hold “+” and enter 1234” on the keypad. Step 2: You will hear a beep along with the “ADMIN MOSE” light illuminating on the front panel.

  • Page 15: Troubleshooting

    Troubleshooting Troubleshooting If you are having trouble with your Swift 5x unit, please see the following solutions. Light illuminates the tray is open while closed Open the tray and check for any obstructions in the bay. Close the tray and check that the Tray Open light is off.

  • Page 16: Warranty And Registration

    Warranty and Registration Warranty and Registration For iCleanse Swift 5x Warranty Each iCleanse product comes with a full 1-year warranty upon registration of your product. For more info visit www.icleanse.com/warranty. Registration Please visit www.icleanse.com/warranty to register your new Swift 5x within 30 days of your purchase to activate your one year warranty.

  • Page 17: Customer Support

    Customer Support We’re Here to Help iCleanse offers comprehensive support 800.969.1166 from our in-house customer experience team. Available Monday thru Friday icleanse.com/support 9:00am - 5:00pm support@icleanse.com Please keep your model number, serial number, and purchase date on hand for any future support.
  • Page 18 Connect with Us Follow our social media accounts for the most up to date news. @_icleanse @_icleanse /icleanse /icleansellc icleanse.com © 2021...

Table of Contents