Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pyle PT888BTWM
Summary of Contents for Pyle PT888BTWM
- Page 1 PT888BTWM Wireless BT Streaming Home Theater Receiver 5.2-Ch Surround Sound Stereo Amplifier System Questions? Issues? with 4K Ultra HD Support, MP3/USB/AM/FM Radio (1000 Watt MAX) We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...
- Page 2 No user-serviceable parts inside, refer servicing to quali ed service personnel. B. Protect voltage line. Avoid high pressure and to be PT888BTWM stomped on, do not pull, push excessively. C. Please put on this unit in the windy place, avoid direct sunshine and nearing heater.
- Page 3 REAR PANEL REMOTE DEVICE FUNCTION 1. STANDBY: Power standby 2. Mute control button 3. HDMI ARC ON/OFF button 4. HDMI input select button 5. COAX/OPTI input select button 6. USB/BT input select button 7. DVD/CD input select button 8. TUNER input select button: 1.
- Page 4 SYSTEM CONNECTION 19. TUNER + : Scan + control button. This button is used to adjust the best signal of the stations in AM/FM system. Press and hold this button to tune the program upward, it will stop until it found the station.
- Page 5 Operating Instructions MAIN CHANNEL TONE AND BALANCE Press the 'MENU’ on the control panel of the receiver system. Adjust the display Preparation before operation 'TRExx’ 'BASSxx’ and ’L--//--R’ . ’VOLUME/MULTI’ is volume/Multi-function knob. • This product must be placed on a flat, solid object to ensure that it has sufficient This knob can adjust main channel bass/Treble volume level and Left/Right channel capacity to support the product without falling.
- Page 6 Solution ARC (Audio Return Channel) Function The power socket is in poor Check the power supply and plug The ARC (Audio Return Channel) function makes it easy for the PT888BTWM to No display contact or without electricity of the socket.
- Page 7 (Smartphones, Tablets, Laptops, Computers, etc.) • Wireless BT Version: 5.0 • Wireless BT Network Name: ‘PYLE PRO’ This product can expose you to a chemical or group of chemicals, which may include “Nickel Carbonate” which is known in the state of California to cause cancer, birth defects, •...
Need help?
Do you have a question about the PT888BTWM and is the answer not in the manual?
Questions and answers
Protect mode is on
The provided context does not include specific instructions on how to turn off protect mode on the Pyle PT888BTWM. However, you can try the following general troubleshooting steps:
1. Turn Off and Unplug - Power off the receiver and unplug it for a few minutes to reset it.
2. Check Wiring - Ensure that speaker wires are properly connected and not shorted or touching each other.
3. Reduce Load - Disconnect all speakers and turn the unit on. If it works without speakers, reconnect them one by one to identify any faulty connections.
4. Ensure Proper Ventilation - Overheating can trigger protect mode. Place the unit in a well-ventilated area.
5. Check Power Supply - Ensure the receiver is set to the correct voltage and not overloaded.
6. Factory Reset - If available, perform a factory reset according to the user manual.
7. Seek Support - If the issue persists, contact Pyle customer support at support@pyleusa.com or call (1) 718-535-1800.
If none of these steps work, servicing by a qualified technician may be required.
This answer is automatically generated