Before You Start... Thank you for buying a Rangemaster appliance. It should give you many years trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used the appliance before.
2. Warming Drawer Temperature control On / Off Indicators Warming Drawer Warming Times The controls consist of a temperature dial and an On/Off switch. These are only visible when the drawer is open. When The time necessary for warming depends on various factors: the drawer is closed, you can tell when the appliance is switched on because the On/Off switch illuminates through •...
To prevent hot drinks from cooling too quickly, use this temperature setting to warm the cups to a temperature that is safe to touch. To prevent hot food from cooling quickly, use this temperature setting to warm plates or serving dishes. The use of oven gloves or pot holders is recommended for this setting.
Troubleshooting Electrical Connection If the dishes are not warm enough, make sure: The appliance is supplied with a power cord and plug for connection to a 220-240 V mains supply. • the appliance is on. The voltage, rated load and plug rating are given on the data •...
Page 7
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Levelling the appliance Fig. 2.1 Shims • 2x self-adhesive black shims metal and 1x self-adhesive stainless steel shim (included). 3 shims are included with this 45 cm built-in appliance. These shims are only used when you notice the appliance is uneven in the cabinet.
Width 560 - 568 Depth 555 (min) Mass (kg) Data Brand Rangemaster RMB45WDBL/SS Model identification ECL14WDBL/BL Type of drawer Electric Number of cavities Volume Litres Max load Temperature Load 40°C - 80°C Maximum total electrical load at 230 V 420 W...
Warranty/After Sales Service DocNo.111-0003 Warranty No.10 If consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of this product. Any cosmetic damage to the appliance must be reported within 90 days of delivery.