Download Print this page

PlayActive Monkey Ring Kit Building Instructions

Advertisement

Quick Links

®
Play Action
Building Instructions
Your tower may be different than shown. When adding to a PlayStar
Playset, follow the instructions included in your original building kit.
Intended for residential use by children ages 2 to 10, only
on properly installed PlayStar playsets. Before use refer to
complete safety guidelines in your original playset, at
www.playstarinc.com, or at 1-888-752-9782.
Only one child, for each single planned seat or single
with a maximum weight of 105 pounds for each child.
planned activity should be allowed on this set at one time,
We're Here To Help!
Important!
Warning!
Call Toll Free
Customer Service: Monday - Friday, 8:00
Shown With Components
(Purchase Separately):
(1) Climbing Rope (PS 7828)
(1 set) Climbing Rocks (PS 7830)
Lumber and Screw
(2) 4" x 4" x 8'
(3) 2" x 6" x 8'
(1) 5/4" x 6" x 10'
(2) 5/4" x 6" x 8'
(5) 2" x 4" x 8'
(140) #8 x 2¹ ₂" Deck Screws
1-888-752-9782
to 5:00
A.M.
Requirements
PS 7744
C.S.T.
P . M.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Monkey Ring Kit and is the answer not in the manual?

Questions and answers

Summary of Contents for PlayActive Monkey Ring Kit

  • Page 1 ® Play Action Building Instructions Shown With Components (Purchase Separately): (1) Climbing Rope (PS 7828) (1 set) Climbing Rocks (PS 7830) Your tower may be different than shown. When adding to a PlayStar Playset, follow the instructions included in your original building kit. Lumber and Screw Important! Intended for residential use by children ages 2 to 10, only...
  • Page 2: Tools Required

    CONTENTS TOOLS REQUIRED Monkey Ring Kit contains: Socket Wrench Square ⁷ ₁₆" & ⁹ ₁₆" Socket Phillips Screwdriver (6) Monkey Rings Adjustable Wrench (6) Chains Ladder Hammer (6) Monkey Ring Hangers ¹ " & ¹ ₄" Drill Bit Tape Measure...
  • Page 3: Building Instructions

    BUILDING INSTRUCTIONS Before starting to build your Play Action Set, make sure all boards are cut and identified by size and name. " Fig. 1 " " 1. Attach one 2" x 6" x 96" beam cap to one 2" x 6" x 93" beam at dimensions shown.
  • Page 4 square with 4" x 4" posts. Secure step with eight #8 x 2¹ ₂" deck screws. (Fig. 3) 5. Flip the step assembly over and attach one 2" x 4" x 28¹ ₂" step at dimension shown. Be sure step is 6.
  • Page 5: Mounting Instructions

    A PlayStar Tower shown. Your Tower may be different. 10. Install one top header (2" x 6" x your tower width) flush with top and outside of 4" x 4" posts. The top header must be 8' as shown. Secure with eight #8 x 2¹ ₂" deck screws (Fig.
  • Page 6 Thank You for choosing PlayStar. Because it is our intention to make this a positive family experience, we have taken great care in preparing this product. Should you have any questions, or if we can assist you in any way, please call our friendly Customer Service Department. Please call us Toll Free at 1-888-PLAYSTAR (752-9782) Monday through Friday, 8:00...