Page 2
User’s Manual Version Note Ver. Note Date Writer A1.0 First publish 20170425 Eileen Lee...
Page 3
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. RTL is a trademark of Realtek Semi-Conductor Co., Ltd. All other product names or trademarks are properties of their respective owners. For more information on this and other JHC products, please visit our websites at: http://www.jhctech.com.cn...
Page 4
User’s Manual Product Warranty (2 years) JHC warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by JHC, or which have been subject to misuse, abuse, accident or improper installation.
Page 5
Technical Support and Assistance Step 1. Visit the JHC web site at www.jhctech.com.cn where you can find the latest information about the product. Step 2. Contact your distributor, sales representative, or JHC’s customer service center for technical support if you need additional assistance.
User’s Manual 1.1 Introduction ALAD-151T is a brand new industrial display, designed to meet the needs of customers who want quick and easy integration with JHCTECH Embedded Box Computers, such as KMDA and FEBC lines. JHCTECH offers two different touch screen of ALAD-151T to meet different demands.
User’s Manual Rear view: Figure 2.3 2.1.1 Power Input Connector (DC-IN) This 3-pin 3.81mm connector provides maximum of 60W power and is considered a low power solution. Connect a DC power cord to this connector. Use a power adapter within 9~36V DC output voltage. Using a voltage out of the range 9~36V may fail to boot the system or cause damage to the system board.
User’s Manual 2.1.2 USB Connector 1 USB2.0 ports by type A connectors in the front . Please refer to Table 2.4 for their pin assignments. Figure 2.5 USB2.0 connector Table 2.4: USB2.0 Connector Signal name USB_P0 USB_P0+ 2.1.3 COM Connector There is a COM which is D-sub 9-pin connectors , communication with computer RS232 serial port .
User’s Manual 2.1.4 OSD Functions (ALAD-1 1 Lines) The OSD of the ALAD-151T Series display (1024 x 768 resolution) was selected to illustrate examples below: Button Function Status Hot Key Indicate operation status. Red:off mode/sl eep mode. Grenn:Normal o peration.
User’s Manual 2.1.5 OSD Setting ◆Signal source input Figure 2.8 1) Press the <signal source>button to select the input mode; 2) Press to shift the cursor 3) Press “AUTO” button to select signal channel ◆Picture Press menu button to display the main menu 1) Press to select picture 2) Press...
User’s Manual Figure 2.9 ◆Sound mode Press to select sound mode(user, standard, music, movie, sport). (Treble or bass can be applicable in the user mode) ◆Treble: Adjust the treble value to the best. ◆Bass: Adjust the bass val. Figure 2.10 ◆Sleep time: Turn off “Monitor”...
User’s Manual Turn off or select “Momitor” to enter in sleeping automatically. Note:The time is “Monitor” sequence playing time, and have no operating time ◆OSD time: Display the time when menu have no operating. Figure 2.11 ◆OSD language: Sets the present OSD language. ◆Scale mode: Selects the scale mode of the picture.
User’s Manual Return to the factory setting. Figure 2.12 2.2 Touch Drivers It is available online at the JHC tech website as follows: http://www.jhctech.com.cn 2.3 Installation 2.3.1 Panel Mount Step 1. Install the panel PC into the panel opening.
Page 21
User’s Manual Figure 2.13 Step 2. Pull out the 4 clamps from the holes around the two sides of the bezel . Figure 2.14 Step 3. Insert the screws into each clamp and fasten them.
User’s Manual Figure 2.15 2.4 Packing List 1 x VGA cable 15P 1.8 meter 1 x HDMI Cable 1.8 meter (optional) 1 x USB-A to USB-A 1.8 meter 1 x DC 12V/6A Power Adapter 1 x CD-ROM for Tuoch Driver...