Using The Soundbar Remote Control; Inserting Batteries Before Using The Remote Control (Aa Batteries X 2); How To Use The Remote Control - Samsung HW-Q900A Full Manual

03 USING THE SOUNDBAR REMOTE CONTROL

Inserting Batteries before using the Remote Control (AA batteries X 2)

Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries
(1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.

How to Use the Remote Control

1
2
3
4
1
Power
2
5
Source
6
7
3
8
Mute
9
4
10
SOUND MODE
5
Bluetooth PAIR
6
Play / Pause
Turns the Soundbar on and off.
• Auto Power Down Function
The unit turns off automatically in the following situations:
• In D.IN / HDMI 1 / HDMI 2 / Wi-Fi / BT mode if there is no audio
signal for 18 minutes.
Press to select a source connected to the Soundbar.
• Voice Feedback On/Off
You can turn on or off the Voice Feedback.
Press and hold the (Source) button on the remote control for
5 seconds while the Soundbar is off (Standby mode).
Each time you change the Voice Feedback setting, the OLED Display
will show "AUI OFF" (Default) or "AUI ON".
Press the (Mute) button to mute the sound.
Press it again to unmute the sound.
You can select the desired sound mode by choosing STANDARD,
SURROUND, GAME PRO, or ADAPTIVE SOUND.
• STANDARD
Outputs the original sound.
• SURROUND
Provides a wider sound field than standard.
• GAME PRO
Provides stereoscopic sound to immerse you in the action while
gaming.
• ADAPTIVE SOUND
Analyzes the content in real time and automatically provides the
optimal sound field based on the characteristics of the content.
Switch the Soundbar to Bluetooth pairing mode. Press the button and
wait for the "BT PAIRING" screen to connect to a new Bluetooth device.
You can also play or pause music by pressing the button.
ENG - 9