Operation; Location Of Controls - Murray 465306x8B Manual

Throttle Control
Lever
Lift
Lever
BLADE ROTATION CONTROL:
control to start and stop the rotation of the blades and also to control
various accessories, such as a snow thrower.
CLUTCH / BRAKE PEDAL:
The first function is a clutch. The second function is a brake. Use the
brake pedal to quickly stop the forward or reverse motion of the unit.
BRAKE PEDAL:
Use the brake pedal to quickly stop.
HEADLIGHT SWITCH:
switch. As with many newer automobiles, the headlights are auto-
matically on whenever the engine runs.
IGNITION KEY SWITCH:
start and stop the engine. When you start the engine and release the
ignition key, the ignition key switch will automatically default to the
recommended RUN-MOW position for normal mowing.
F-050712L

OPERATION

LOCATION OF CONTROLS

Use the blade rotation
The pedal has two functions.
There is not a separate headlight
Use the ignition key switch to
SHIFT LEVER:
Use the shift lever to change the speed and the
direction of the unit.
AUTOMATIC DRIVE DISCONNECT:
matic drive disconnect, located under the seat, to disengage the
transmission.
LIFT LEVER:
Use the lift lever to change the height of cut.
PARKING BRAKE LEVER:
to engage the brake when you leave the unit.
SPEED CONTROL PEDAL:
to change the speed and the direction of the unit.
SPEED CONTROL PEDAL:
to change the speed of the unit.
THROTTLE CONTROL LEVER:
lever to increase or decrease the speed of the engine.
14
Blade Rotation
Control
Speed
Control
Pedal
Clutch/Brake
Pedal
Shift
Lever
Figure 4
Use the auto-
Use the parking brake lever
Use the speed control pedal
Use the speed control pedal
Use the throttle control