Page 2
Use the remote control within 16.4 foot range from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. Step 1: Insert a coin vertically in the groove Step 2: Install the battery inside the on the battery cover, and turn 45º clockwise, remote control, the positive (+) side up.
Page 3
Step 3: Replace the battery cover, making sure the battery cover groove is aligned with the “unlock” sign. Insert a coin vertically in the groove and press it gently, then rotate 45º The operation starts and Press this button to counter-clockwise, making the groove aligned stops when this button is select the desired...
Page 4
Ensure the unit is plugged in and power is available. Ensure the unit is plugged in and power is 1. Press the ON/OFF button to start the air available. conditioner. 1. Press the ON/OFF button to start the air 2. Press the MODE button to select Dry. conditioner.
Page 5
(Setting both ON and OFF timers simultaneously) Press the TIMER button to initiate the Auto-start and Auto-stop setting program of the unit. The time can be set in the range of 0~24 hours. This feature is useful when you want to program the AC to automatically STOP and then START.
Page 6
NOTE: - The device could comply with the local national regulations. In Canada, In this mode, the fan will continue to it should comply with CAN ICES-3(B)/NMB-3(B). In USA, this device run for 3 minutes after the compressor complies with part 15 of the FCC Rules. Operation is subject to the shuts off.
Need help?
Do you have a question about the OBZ-06CR3 and is the answer not in the manual?
Questions and answers