Table of Contents
Advertisement
10
www.aeg.com
5.1 Activating and
deactivating
Touch
for 1 second to activate or
deactivate the hob.
The control bars come on after you
activate the hob and go off after you
deactivate the hob.
When the hob is deactivated you can
only see
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• you do not place any cookware on the
hob for 50 seconds,
• you do not set the heat setting for 50
seconds after you place the
cookware,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth). When you
hear the acoustic signal, the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you do not deactivate a cooking zone
or change the heat setting. After some
time, the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
1 - 2
3 - 4
5
6 - 9
.
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hours
5.3 Using the cooking zones
CAUTION!
Do not place hot cookware
on the control panel. There
is a risk of damage to the
electronic parts.
Place the cookware in the centre of the
selected zone.
Induction cooking zones adapt to the
dimension of the bottom of the cookware
automatically.
When you place the cookware in the
correct position, the hob recognizes it
and the appropriate control bar comes
on. A red cooking zone indicator appears
above the control bar and indicates the
position of the pot.
Each square on the control panel
represents one cooking zone on the
induction cooking surface. Zone
indicators show which cooking zone is
controlled by the appropriate control bar.
Advertisement
Table of Contents
