Advertisement
10. Install the inner cover.
Slide the covers located on the both lat-
eral sides of the camera and put the
inner cover on the camera until the
hooks inside the inner cover are held in
the holes of the camera (until a click is
heard).
Important: Put the inner cover down on
the camera until the outside cover of
the camera cannot be seen from the
opening (from which the camera
lens is visible) of the inner cover. If
this integration is not successfully
performed, the inner cover may be
removed or the hidden part at the
top of the screen may become larg-
er in the WIDE mode.
How to remove the inner cover
Press the inner cover from the front and rear
sides inward (at the same vertical position as
the hooks) to bend the cover and remove the
cover from the camera.
Inner cover
Hook
Put on until a click is
heard
Press from the front and rear
sides inward to bend
Cover
9
Advertisement
