KidKraft Sort It and Store It Bin Unit 15451A Assembly Instructions

Please retain this information for future reference
IMPORTANT INFORMATION
PLEASE READ FIRST
Children have died.
Direct adult supervision required.
To prevent strangulation:
Do not allow child to insert head into bins or rails.
Head can get stuck in bins or over rails.
To prevent death or serious injury from tip-over:
on bottom shelf only.
Do not let child pull or climb on this product.
Step 2
WARNING:
Product includes
small parts with potentially hazardous sharp points
and sharp edges in the unassembled state. Keep
unassembled parts away from children.
WARNING:
CHOKING HAZARD. Small parts and sharp points,
not suitable for children under 3 years.
Sort It and Store It Bin Unit - Espresso
Assembly Instructions
HARDWARE PARTS LIST
A. Hex Screw x 16
1 1/4 in / 32 mm
B. Hex Bolt x 8
2 in / 50 mm
C. Nylon Nut x 8
Wrench x 1
Allen Wrench x 1
Step 3
USE AND MAINTENANCE:
tighten hardware if necessary. If maintenance is not carried
out, the product could cease to function properly and
small parts could be accessible to children.
Yellow
Red
Blue
Yellow
Red
Blue
Step 4
Before assembling remove
all packaging material
Do not tighten screws until
completely assembled.
To order replacement parts, please visit www.kidkraft.com
Step 1
*Repeat step 1
Green
Green
Before calling customer service, please
locate the batch code number
(example: 105906/65006/04) found on the
bottom or back of your product.
Item # 15451A
Maximum recommended
distributed load:
20 lbs per shelf
Customer Service
1-800-933-0771
www.kidkraft.com
1