Its purpose, aside from operations instructions, is to promote safety through the use of accepted operating procedures. Read all instructions thoroughly before operating the brake. Also contained in this manual is the parts list for your brake. It is recommended that only Tennsmith or factory authorized parts be used as replacements.
The brake must be fastened to the bench for safe operation. THE BRAKE WILL NOT BEND PROPERLY IF IT IS NOT LEVEL. Tennsmith Inc. / 6926 Smithville Hwy. / McMinnville, TN 37110 / 931-934-2211 / Fax 931-934-2220 www.tennsmith.com...
When the clamping pressure is properly adjusted, lock the nuts against the clamp swivel to prevent any change in adjustment. Tennsmith Inc. / 6926 Smithville Hwy. / McMinnville, TN 37110 / 931-934-2211 / Fax 931-934-2220 www.tennsmith.com...
This adjustment is made by turning the nut located on the right hand side of the hold down assembly. Tennsmith Inc. / 6926 Smithville Hwy. / McMinnville, TN 37110 / 931-934-2211 / Fax 931-934-2220 www.tennsmith.com...
If you are ordering parts please furnish both the model and serial number of your machine. Part’s can be obtained directly from Tennsmith Inc. Tennsmith Inc. / 6926 Smithville Hwy. / McMinnville, TN 37110 / 931-934-2211 / Fax 931-934-2220 www.tennsmith.com...
Page 8
3/8 in / 9.5mm 3/8 in / 9.5mm in capacity material Dimensions, LxWxH Weight 280 lbs / 127 kg 220 lbs / 100 kg Tennsmith Inc. / 6926 Smithville Hwy. / McMinnville, TN 37110 / 931-934-2211 / Fax 931-934-2220 www.tennsmith.com...
Need help?
Do you have a question about the U48-22 and is the answer not in the manual?
Questions and answers