Advertisement
Step 5
Connect wall panel zip to the roof
and base, zips start under
Velcro flaps.
Step 6
Zip the wall panel to the roof and base.
Fit equipment hanger ends to poles.
Position equipment hangers as required.
Equipment
Hanger End
Assembly Instructions
Two Person Assembly
Mammoth
Elite 360S SA
Assembly Guide
Equipment Hangers
Lower Equipment Hanger
Parts List
Yellow Pole
Blue Pole
Black Pole
x33
x12
x12
Equipment
Support Pole
Hanger Ends
Rubber Foot
x12
x2
Straight Pole Connectors x4
Upper Equipment Hanger
3-Way
4-Way
Corner
Join
x8
x12
Support Pole
Rubber Top
x2
Centre Securing Ring x2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mammoth Elite 360S SA
Summary of Contents for Mammoth Elite 360S SA
- Page 1 Assembly Instructions Step 5 Connect wall panel zip to the roof Two Person Assembly and base, zips start under Velcro flaps. Mammoth Elite 360S SA Assembly Guide Equipment Hangers Upper Equipment Hanger Lower Equipment Hanger Step 6 Parts List Zip the wall panel to the roof and base.
- Page 2 Step 3 Step 1 Insert ceiling poles into 3-way corners and 4-Way joins. Organise poles and connectors into their colours and groups. Fit centre securing ring over pole before fitting to 4-way join. Unzip and lay out tent. 3-Way Corner Fit centre ceiling poles into straight pole connectors.
Need help?
Do you have a question about the Elite 360S SA and is the answer not in the manual?
Questions and answers