Iceking IK8951WE Installation And Operating Manual page 8


The rear of your new appliance will have either an exposed condensor (Fig.3)
or a concealed condenser or 'flat-back' (Fig.2).

Your Appliance may come supplied with spacers fitted to the rear or you may
be supplied with two plastic spacers similar to those shown in Fig.3a or 3b. Fit
these to the rear of the appliance as shown (Fig.3a & 3b). When fitted, the
spacers will ensure an air gap between the condenser and the rear wall.

If the appliance does not come supplied with spacers fitted or you are not
supplied with plastic spacers to fit yourelf, simply ensure that a gap of
approximately 50mm is maintained behind the condenser
REAR SPACERS:
7