Related Manuals for Icop VDX-6324-FD Series
Summary of Contents for Icop VDX-6324-FD Series
- Page 1 Full 16-bit ISA Bus VDX-6324RD-FD /VDX-6324RD-FD-PLUS DM&P Vortex86DX 800MHz Half-Size CPU Module with 4S/4USB/VGA/LCD/LAN/GPIO/FDD 256MB DDR2 Onboard User’s Manual (Revision 1.1A)
- Page 2 No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in any form or by any means without the prior written permission of the ICOP Technology Inc. Copyright 2009 ICOP Technology Inc.
-
Page 3: Table Of Contents
T a b l e C o n t e n t s T a b l e o f C o n t e n t s ............. iii C h a p t e r 1 Introduction……………………………………………1 Packing List ............1 Product Description .......... - Page 4 This page is blank...
-
Page 5: Chapter 1 Introduction
C h a p t e r Introduction Packing List Product Name Package Embedded Vortex86DX CPU All-in-One Board RS232 cable x 3 VDX-6324RD-FD PRINTER cable x1 IDE cable x 1 & FDD cable x 1 USB cable x 2 (USB port x 2 VDX-6324RD-FD-PLUS GPIO cable x 1 YKB for PS/2 Keyboard &... -
Page 6: Product Description
Product Description The VDX-6324-FD family of low-power x86 embedded controller is designed to meet Half-Size specification with full 16-bit ISA Bus, and integrated with the following features. 800MHz Vortex86DX System-On-Chip Onboard 4MB SPI Flash VGA, TFT/LVDS LCD support up to PC/104-Plus expansion bus 1280x1024 resolution Meet PC/104 stacking spec. -
Page 7: Specifications
1.3 Specifications Features VDX-6324-FD DM&P SoC CPU Vortex86DX- 800MHz Real Time Clock with Lithium Battery Backup L1:16K I-Cache, 16K D-Cache L2:128KB Cache Cache AMI BIOS BIOS PC/104 Standard Compliant (Optional: PCI-104) Bus Interface 256 /512MB DDR2 Onboard System Memory Software programmable from 30.5 us to 512 seconds x2 Watchdog Timer sets(W atchdog 1 fully compatible with M6117D) XGI Volari Z9s Chipset... - Page 8 2.54 mm ∅ 26-pin box header for Print x1 Connectors 2.54 mm ∅ 10-pin box header for RS-232 x3 2.54 mm ∅ 10-pin box header for USB x2 2.54 mm ∅ 20-pin box header for 16-bit GPIO x1 2.54 mm ∅ 3-pin header for RS-485 x1 2.54 mm ∅...
-
Page 9: Board Dimension
1.4 Board Dimension Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module... -
Page 10: Chapter 2 Installation
C h a p t e r 2 C h a p t e r 2 C h a p t e r 2 C h a p t e r 2 Installation 2.1 Board Outline COM2 RS-485 RS-232/422/485 Display Type COM4 COM3 GPIO... -
Page 11: Connectors & Jumpers Location
2.2 Connectors & Jumpers Location Connectors Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module... - Page 12 Jumpers & LEDs Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module...
-
Page 13: Connectors & Jumpers Summary
Connectors & Jumpers Summary Summary Table Description Type of Connections Pin nbrs. 44-pin Box Header, 2.0∅ , 22x2 USB1 10-pin Box Header, 2.54∅ , 5x2 USB2 10-pin Box Header, 2.54∅ , 5x2 JTAG 6-pin Wafer, 1.25∅ , 6x1 Reset 2-pin Pin Header, 2,54∅,1x2 Redundancy (Optional) 7-pin... - Page 14 J40 Master/Slave for IDE & CF 3-pin Slide Switch J41 Console Redirection (Optional) 2-pin Pin Header, 2,54∅,1x2 J42 FDD 34-pin Pin Header, 2.0∅ ,17x2 PWR-L Power Active LED (Red) LED-SMD IDE Active LED (Green ) IDE- LED-SMD MTBF- MTBF-Out (Orange) LED-SMD CF1 Compact Flash 50-pin...
-
Page 15: Pin Assignments & Jumper Settings
2.4 Pin Assignments & Jumper Settings J1: IDE (44 Pins) Pin # Signal Name Pin # Signal Name IDERST IDED7 IDED8 IDED6 IDED9 IDED5 IDED10 IDED4 IDED11 IDED3 IDED12 IDED2 IDED13 IDED1 IDED14 IDED0 IDED15 IDEREQ IDEIOW IDEIOR ICHRDY IDEACK IDEINT IDESA1 IDECBLID... - Page 16 J3: USB 2 Pin # Signal Name Pin # Signal Name LUSBD2- LUSBD3- LUSBD2+ LUSBD3+ GGND GGND J4: JTAG (Default setting: off) Pin # Signal Name Pin # Signal Name J5: RESET Pin # Signal Name Pin # Signal Name Reset J6: Redundancy (Optional) Pin #...
- Page 17 J8: PS/2 KBD / Mouse Pin # Signal Name Pin # Signal Name KBCLK MSCLK KBDAT MSDAT GGND GGND GGND J9: COM 1 (Optional: TTL/ GPIO-P4 / PWMx8) Signal Signal Pin # Pin # Name Name DCD1 RXD1 TXD1 DTR1 DSR1 RTS1 CTS1...
- Page 18 J11: GPIO (Port 0 / Port 1/PWMx16) Pin # Signal Name Pin # Signal Name GP00 GP10 GP01 GP11 GP02 GP12 GP03 GP13 GP04 GP14 GP05 GP15 GP06 GP16 GP07 GP17 J12: RS485 (Auto direction) Pin # Signal Name RS485＋ RS485－...
- Page 19 J18: Power Connector (Terminal Block 5.0mm) Pin # Signal Name J19: COM3 Pin # Signal Name Pin # Signal Name DCD3 RXD3 TXD3 DTR3 DSR3 RTS3 CTS3 J20: PRINT Pin # Signal Name Pin # Signal Name STB- AFD- ERR- INIT- SLIN- ACK-...
- Page 20 J22: PC/104 Connector – 64pin Pin # Signal Name Pin # Signal Name IOCHCHK RESETDRV IRQ9 DRQ2 -12V +12V IOCHRDY SMEMW * SA19 SMEMR * SA18 IOW * SA17 IOR * SA16 DACK3 * SA15 DRQ3 SA14 DACK1 * SA13 DRQ1 SA12 REFRESH *...
- Page 21 J24: PC/104 Connector – 40pin Pin # Signal Name Pin # Signal Name MEMCS16 * SBHE * IOCS16 * SA23 IRQ10 SA22 IRQ11 SA21 IRQ12 SA20 IRQ15 SA19 IRQ14 SA18 DACK0 * SA17 DRQ0 MEMR * DACK5 * MEMW * DRQ5 DACK6 * DRQ6...
- Page 22 J27: PC/104 + (Optional) VI/O Default setting: +5V If you need to use VI/O as +3.3V, please see the page 19. Pin # AD00 VI/O(+5V) AD02 AD01 AD05 AD04 AD03 C/BE0# AD07 AD06 AD09 AD08 AD11 VI/O(+5V) AD10 AD14 AD13 AD12 +3.3V C/BE1#...
- Page 23 Please remove the R229 and add 0 ohm (1206 type) on R230 Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module...
- Page 24 J28: VGA (D-Sub connector) Pin # Signal Name Pin # Signal Name R OUT G OUT B OUT DDCDAT HSYNC VSYNC DDCCLK J29: LCD Connector Pin # Signal Name Pin # Signal Name +3.3V +3.3V LCLK LHSYNC LVSYNC LBACKL LVDDEN (Please refer to Appendix A, for TFT Flat Panel Data Output) Vortex86DX-6324RD-FD Vortex86DX™...
- Page 25 J30~J35: Display type setup (CRT /LCD) Connector Pin # Signal Name GPIOA GPIOB GPIOC GPIOD GPIOE GPIOF (Please refer to Appendix D, for Display type setup) J36: LAN Pin # Signal Name Pin # Signal Name Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module...
- Page 26 J37: LINE OUT (Optional) Pin # Signal Name LOUTR LOUTL J38: MIC-IN (Optional) Pin # Signal Name MICVREF MIC-IN J39: JTAG Disable (Default setting: Pin 1 & Pin 2 short) Pin # Signal Name Pin # Signal Name JTAG Disable J41: Console Redirection (Pin 1 &...
- Page 27 J42: FDD Pin # Signal Name Pin # Signal Name DENSEL INDEX\ MTRO\ DS1\ DS0\ MTR1\ DIR\ STEP\ TR0\ HDSEL\ DSKCHG\ Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module...
-
Page 28: System Mapping
System Mapping Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module... - Page 29 Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module...
- Page 30 Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module...
-
Page 31: Watchdog Timer
Watchdog Timer There are two watchdog timers in Vortex86SX/DX CPU. One is compatible with M6117D watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0 and the new one is called WDT1. We also provide DOS, Linux and WinCE example for your reference. For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file:... -
Page 32: Gpio
GPIO (General Purpose Input / Output) 40 GPIO pins are provided by the Vortex86SX/DX for general usage in the system. All GPIO pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors. We also offer DOS, Linux and WinCE example for your reference. For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file:... -
Page 33: Spi Flash
SPI flash (Serial Peripheral Interface) As SPI Flash Serial Peripheral Interface) offers many benefits including: reduced controller pin count, smaller and simpler PCBs, reduced switching noise, less power consumption, and lower system cost Many of users may consider using a formatted SPI flash to boot for the system or emulate SPI flash as Floppy (A: Driver or B: Driver). -
Page 34: Pwm
New Age x86 SoC platform and we also offer the sample code of PWM which will guide the engineer to control the PWM functionality smoothly. For more inquire of this sample code that please contact our sales team or mail to: info@icop.com.tw Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module... -
Page 35: Ide To Sd
44 pins IDE to SD Adapter can be easily installed on all VDX-63xx CPU boards. You or your customers just do the BIOS setting and use SD-1917 to connect IDE connector of VDX-63xx directly. For further inquiries of SD-1917, please contact ICOP sales team or mail to: info@icop.com.tw for your request. -
Page 36: Chapter 3 Driver Installation
The VDX-6324RD-FD ISA CPU board provides the VGA and LAN drivers for DOS 6.22 Windows CE 5.0, CE 6.0, Windows 98, Windows XP Professional, Windows Embedded standard (XPE) and Windows 2000. Please download the drivers for VDX-6324RD board on ICOP official website: http://www.icop.com.tw/en/product/Half-Size-SBC-VDX-6324D-FD-80 0MHz/VDX-6324D-FD.html... -
Page 37: Appendix
Appendix TFT Flat Panel Data Output Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module... -
Page 38: Tft Flat Panel Support List
B.TFT Flat Panel Support List Size Brand Resolution Model No. 5.7” Data image 320x240 FG050701DSSWBG01 5.7” Optrex 320x240 55264GD057J-FW-ABN 5.7” TOSHIBA 320x240 LTA057A343F 5.7” Sharp 320x240 (QVGA / VGA) LQ057Q3DC02 5.7” Kyocera 320x240 (QVGA / VGA) TCG057QV1AC-G10 5.7” 320x240 (QVGA / VGA) PD057VU4 /U5 5.7”... -
Page 39: Lvds Flat Panel Support List
C. LVDS Flat Panel Support List If you would like to use LVDS Flat Panel with Vortex86SX / Vortex86DX series, please contact our regional sales to get ICOP-0096 information or visit ICOP website: http://www.icop.com.tw/pddetail.aspx?id=65&pid=4 ICOP–0096 : 18-bit TFT to LVDS converter and Cable-LVDS-30: LVDS Cable 30cm... -
Page 40: Flat Panel Hardware Setting
10.4” 800x600 G104SN02 12.1” 800x600 G121SN01 15” 1024x768 G150XG01 D. Flat Panel Hardware Setting: The VDX-6324RD-FD offers the Hardware setting for the various TFT LCD Flat Panels support and please make sure the jumper setting (J30~J35) before you connect the LCD. Display type setup Connector Note: "C"... -
Page 41: Flat Panel Wiring And Lighting
Wiring LCD Cable Please refer to Page 20 (J29: LCD connector) and Page 33~37. Or for more LCD lighting and integration service, please contact our regional sales or mail to info@icop.com.tw you have any questions. Vortex86DX-6324RD-FD Vortex86DX™ Half-Size CPU Module... -
Page 42: Tcp/Ip Library For Dos Real Mode
Mity-Mite Serial Server, Web Camera Tiny Server and RSIP Serial Server. DSock is free for All ICOP products using M6117D/Vortex86/Vortex86SX/Vortex86DX CPU and ICOP also provide the business version of DSock for those customers who are using other x86 CPUs. -
Page 43: Bios Default Setting
G. BIOS Default setting If the system cannot be booted after BIOS changes are made, Please follow below procedures in order to restore the CMOS as default setting. Press “End” Key, when the power on Press <Del> to enter the AMI BIOS setup Press “F9”... -
Page 44: Warranty
Warranty This product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms.