Coopers of Stortford H262 STR Instructions For Use

20 LED Solar String Lights
Please read and retain these instructions for future reference
ALWAYS POSITION IN DIRECT SUNLIGHT
Dimensions
LIGHT CHAIN LENGTH 3.8M, LEAD WIRE (BETWEEN LIGHT
STRING AND SOLAR PANEL 2M), TOTAL LENGTH 5.8M
•
MIX AND MATCH GREAT VALUE 3 FOR 2 CHRISTMAS
SOLAR LIGHTS
•
WITH A CHOICE OF FLASHING OR STEADY SETTINGS
•
2 METRES OF LIGHTS WITH 20 LED'S, SPACED 20CM
APART
•
COVER YOUR GARDEN WITH FESTIVE CHEER!
Battery: Battery 1 pc "AA" 1.2v 600Mah, Ni-MH,
Rechargeable
LEDs not replaceable
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts
have been removed from the packaging.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on or cause it to turn off automatically.
BEFORE FIRST USE: Remove the protective film from the solar panel.
CHARGING AND OPERATION:
1. Set switch (located on the back of solar case) to "ON" position. Charge the solar product by placing it
under direct sunlight for at least 8 hours.
2. The light will work automatically. It will automatically charge under direct sunlight during the
daytime and illuminate at night.
3. This solar lights has "Flashing" function as well. Turn switch to "ON" position and press "MODE"
button you can achieve the " FLASHING" function.
NOTE: In order to verify that the switch is correctly in the "ON" position, cover the solar panel with your
hand and the light should turn on automatically.
IMPORTANT:
1. Install the solar product in an area where it can get direct sunlight.
2. Leave the switch to "ON" position.
3. Select an outdoor location away from other light sources at night, such as street lights. It may cause
the product not to turn on automatically at night.
4. Duration of light depends on solar product's level of sunlight exposure, geographical locations,
Instructions for Use
H262
H262 STR Stars
H262 SF Snowflake
v001: 15/03/21