Advertisement
Quick Links
LITZE™
Models/Modelos/Modèles
63043LFp
63053LFp
63044LFp
63054LFp
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
For easy installation of your Brizo ® faucet you will need
to READ ALL warnings, care, and maintenance information
before beginning.
Installation Requirements:
Hole Diameter:
1 3/8" ± 1/4"
Maximum Deck Thickness: 3" (76 mm)
• With Escutcheon: 2 3/4" (70 mm)
• Thin Gauged Sinks: Use Thin Deck Aid RP37490
Para facilitar la instalación de su grifo Brizo®, antes de
comenzar deberá LEER TODAS las advertencias, infor-
mación sobre el cuidado y el mantenimiento.
Requisitos para la instalación:
Diámetro del agujero: 1 3/8" ± 1/4"
Grosor máximo de la encimera: 3" (76 mm)
• Con la chapa de cubierta: 2 3/4" (70 mm)
• Para encimeras de menos grosor: Use la pieza para
encimeras delgadas RP37490
Pour installer votre robinet Brizo ® facilement, vous devez
LIRE TOUTES les mises en garde ainsi que les instructions
d'entretien et de maintenance avant de débuter.
Exigences d'installation :
Diamètre du trou : 1 3/8 po ± 1/4 po
Épaisseur maximale de la plage : 3 po (76 mm)
• Avec plaque de finition : 2 3/4 po (70 mm)
• Éviers minces : utilisez la plaque de renfort RP37490
To access additonal technical documents & product info, visit www.brizo.com/Your-Model-Number-Here
(example: www.brizo.com/9159T-DST)
Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.brizo.com/p/Your-Model-
Number-Here (ejemplo: www.brizo.com/9159T-DST)
Pour avoir accès à des documents techniques supplémentaires et à de l'information sur le produit, visitez www.brizo.com/Votre-
numéro-de-modèle-ci (exemple : www.brizo.com/9159T-DST)
91810
63063LFp
63064LFp
1
PULL-DOWN KITCHEN FAUCET
LLAVE DE AGUA/GRIFO EXTRAÍBLE
PARA COCINAS
ROBINET À BEC RÉTRACTABLE POUR
ÉVIER DE CUISINE
Accessory Order Only
Solo para ordenar accesorios
Accessoire livrable séparément
pSpecify Finish/Especifíque el Acabado/Précisez le Fini
RP79275p
Soap/Lotion Dispenser
Dispensador de jabón/loción
Distributeur de savon ou de lotion
RP71451p
Escutcheon
Chapa
Plaque de finition
?
www.brizo.com
1-877-345-BRIZO (2749)
brizosupport@brizo.com
09/07/2018
Rev D
Advertisement
Summary of Contents for Briz LITZE 63043LF Series
- Page 1 PULL-DOWN KITCHEN FAUCET 91810 LLAVE DE AGUA/GRIFO EXTRAÍBLE PARA COCINAS LITZE™ ROBINET À BEC RÉTRACTABLE POUR Models/Modelos/Modèles ÉVIER DE CUISINE Accessory Order Only Solo para ordenar accesorios Accessoire livrable séparément RP79275p Soap/Lotion Dispenser Dispensador de jabón/loción 63043LFp 63053LFp 63063LFp Distributeur de savon ou de lotion RP71451p Escutcheon Chapa...
- Page 2 You may need: Usted puede necesitar: Articles dont vous pouvez avoir besoin: OPTIONAL ESCUTCHEON INSTALLATION / INSTALACIÓN OPCIONAL DE THIN DECK INSTALLATION/ INSTALACIÓN EN ENCIMERA DE GROSOR UNA CHAPA / INSTALLATION DE LA PLAQUE DE FINITION FACULTATIVE DELGADO / INSTALLATION DE LA PLAQUE DE RENFORT Place escutcheon (RP37490 not included) and gasket under faucet base.
- Page 3 SEALANT OVERTIGHTEN SELLADORES APRIETES DEMASIADO PRODUITS D’ÉTANCHÉITÉ TROP SERRER NOTE: If you determine the PEX supply tubing for this faucet is too long and must be shorter to create an acceptable installation, follow the instruction for Custom Fit Connections. NOTE: If you determine the PEX supply tubing for this faucet is too long and must be shorter to create an acceptable installation, follow the instruction for Custom Fit Connections.
-
Page 4: Instructions De Nettoyage
Side View Vista lateral Vue latérale Backflow Protection System Your Brizo ® faucet pull-down spout incorporates a backflow protection system that has been tested to be in compliance with ASME A112.18.3 and ASME A112.18.1 / CSA B125.1. It incorporates two certified check valves in series, which operate independently and are integral, non-serviceable parts of the wand assembly. - Page 5 CUSTOM FIT CONNECTIONS / CONEXIONES ESPECIALES / SPÉCIAUX TUYAUTERIE BRANCHEMENT Installer accepts the responsibility to cut supply tubing in a way that allows a leak-free joint to be created. Brizo is not responsible for tubing that is cut too short or cut in a way that will not allow for a leak-free joint. Must use RP50952 sleeves supplied with model and nuts included on supply lines.
-
Page 6: Maintenance
Maintenance If faucet exhibits very low flow – Unscrew aerator (1) by pulling directly back on stem. Replace cartridge and with aerator wrench (2) from sprayer wand and clean reassemble. debris from sprayer outlet and aerator screen. WARNING: Failure to securely tighten bonnet nut with a wrench could result in water damage. - Page 7 Soap Dispenser Installation Recommended spacing between holes for faucet and soap dispenser is 4" (101.6 mm) minimum. • Separate head (1) from body assembly (2). • Make sure gasket (3) is properly seated in the base of the body assembly. •...
- Page 8 Limited Warranty on Brizo ® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Brizo® faucet are warranted to the original consumer Proof of purchase (original sales receipt) from the original purchaser must be made available to Brizo Kitchen & Bath purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the Company for all warranty claims unless the purchaser has registered the product with Brizo Kitchen &...