Related Manuals for BENDEL TORNADOR FOAM Z-011S
Summary of Contents for BENDEL TORNADOR FOAM Z-011S
- Page 1 Bedienungsanleitung Orignal-Bedienungsanleitung / Original Instruction Manual TORNADOR-FOAM-GUN Z-011S Beispielhafte Abbildung / Exemplary image BENDEL Werkzeuge GmbH & Co.KG Wilhelm-Schulze-Str-8-10 ° D-29549 Bad Bevensen...
- Page 2 Ref. Q'ty Ref. Q'ty Part No. Description Part No. Description Tool No. Tool SPZ011S001 Housing 19 SPZ011022A Air Inlet (1/4"PF) SPZ020S007 20 SPZ011030 Small Nozzle SPZ010008A Screw 21 SPZ011031 Big Nozzle SPZ010009B Trigger (Stainless) 22 SPZ011032 O-Ring AS-018 SPZ010010 Screw 23 SPZ011002 Snow Cup Ass'y SPZ010026...
- Page 3 Read and understand these instructions before operating the tool. General safety instructions and individual safeness Attention • You need to read, understand and follow the complete instruction manual and the safety briefing BEFORE USE. Afterwards the instruction needs to be kept at a adequate place, accessible for any user.
- Page 4 Projectile hazards: • Even small projectiles, for example swirled by the outlet air of your tool, can injure eyes and lead to blindness. • Always wear impact-resistant eye and face protection when involved with or near the operation, repair or maintenance of the tool or changing accessories on the tool.
- Page 5 Please consult the technical data in this instruction manual. Pneumatic tool and safety instructions • The goal of Bendel Werkzeuge is to offer tools that help your work safely and efficiently. • The most important safety device for this or any tool is YOURSELF.
- Page 6 Air supply and connection hazards: • Air under pressure can cause several injury ! • Always shut off air supply, drain hose of air pressure and disconnect tool from air supply, when not in use, before changing accessories or maintenance. •...
- Page 7 You must observe the following points in the interest of your own safety!!! Safety instructions: • When working with the FOAM-GUN, please wear protective goggles to prevent eye injuries. • Only use the FOAM-GUN in ventilated spaces. • Never operate the FOAM-GUN with more than 6.3bar. •...
-
Page 8: Technical Data
Serial number EG declaration of conformity for machines (EG-RL 2006/42/EG) Herewith BENDEL Werkzeuge GmbH & Co.KG Wilhelm-Schulze-Str.8-10 D-29549 Bad Bevensen declares that the machine Z-011, Z-011a, Z-011aN, Z-011WR, Z-011S Tornador-Foam-Gun is conform with the legal regulation of the above mentioned directive.