Oster BLSTKAG-BPB Instruction Manual page 7

Table of Contents

Advertisement

Available languages

Available languages

H OW D OE S YO UR OS TER ® BLEND ER
Your OSTER
blender is a multiple‑speed electrical appliance that operates at a wide range of
®
speeds—from lowest to highest. This speed range makes food preparation interesting, quick,
and easy.
In addition, your OSTER
blender has two different operation modes:
®
1.
CONTINOUS to blend, mix, and finely chop.
2.
BLEND CONTROL CYCLE, used to grind chopped food, such as chopped vegetables,
nuts or cheese. There are different ways to operate the BLEND CONTROL CYCLE, but
they are all related to activating blender motor at intervals, alternating between on and off.
During "on" position of cycle, food is ground and moved away from blades. During "off"
position of cycle, food is replaced over blades to smooth out processing.
NOTE: One cycle includes operating blender for about 2 seconds and then allowing blades to
come to a complete stop.
S P E E D S ELECT IO N
PULSE FUNCTION (
)
1.
Press and hold PULSE (
) button for desired length of time.
2.
Release PULSE button and allow blades to stop. Repeat cycle as needed.
NOTE: One cycle includes operating blender for about 2 seconds and then allowing
blades to come to a complete stop.
ICE-CRUSHING FUNCTION (
)
1.
Press and hold ice‑crushing function (
2.
Release button and allow blades to stop.
Repeat cycle as needed.
NOTE: One cycle includes operating blender for about 2 seconds and then allowing blades to
come to a complete stop.
SPEED CHART
In the chart below, you will find a typical application, which will serve as a guide to use your blender.
(Follow chart matching model/number of speeds of your blender.)
FOR MODELS WITH CONTROL PANEL WITH BUTTONS:
2 SPEEDS + HIGH & LOW PULSE
SPEED
1
2
FUNCTION
SOUPS
JUICES
BLSTKxx-xxx_20SEM1 (LA).indd 6
WO RK
) for desired length of time.
ICE‑CRUSHING / HIGH PULSE
SALSAS / LOW PULSE
En glis h -5
FOR MODELS WITH CONTROL PANEL WITH ROTARY DIAL:
2 SPEEDS + PULSE
SPEED
1
2
FUNCTION
ICE‑CRUSHING/PULSE
SOUPS
JUICES
B LE N DI NG T IP S
1.
Always place liquids in jar first, unless recipe indicates otherwise.
2.
To crush ice: Crush 6 ice cubes or about 2 cups of ice at a time.
3.
Do not remove lid while appliance is running. Remove filler cap
to add smaller ingredients.
4.
Cut all firm fruits and vegetables, cooked meats, fish and
seafood into pieces of no more than 1/2 in. to 1 in. Cut all types
of cheeses into pieces of no more than 1/2 in.
5.
This blender does not puree, does not whisk egg whites or egg
substitutes for spreads, does not knead dough, and does not cut
raw meats.
Be careful when pouring hot liquids into food processor or blender,
as hot liquids may pop out of appliance due to a sudden burst of
steam.
C ARE AN D MA IN T E NA NCE
PLEASE NOTE: UNPLUG MOTOR BASE BEFORE CLEANING. NEVER IMMERSE
BLENDER IN WATER OR ANY OTHER LIQUID. Wash blender's outside surface with
a damp, soft sponge using mild soap. All parts, except motor base, may be washed
in dishwasher. Pull apart sealing ring and threaded bottom cap to clean. Hold sealing
ring with both hands and pull down over threaded bottom cap using both your thumbs.
Sealing ring and threaded bottom cap may be washed in dishwasher top rack ONLY.
You may also wash all parts with warm soapy water.
S TO R IN G YO UR AP P LI AN CE
After cleaning, reassemble jar with blade, sealing ring and threaded bottom cap.
Store blender leaving a gap between lid and jar to prevent container odors.
En glish- 6
2/28/20 4:03 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Blstkag-rpbBlstkag-wpbBlstkap-bpbBlstkap-rpbBlstkap-wpbBlstkag-brd ... Show all

Table of Contents