Beko WTK62041W User Manual page 36

Problem
Machine does not switch to
spinning step. (*)
Washing performance is
poor: Laundry turns gray.
(**)
Washing performance is
poor: Stains persist or the
laundry is not whitened. (**)
Washing performance is
poor: Oily stains appeared
on the laundry. (**)
Washing performance
is poor: Clothes smell
unpleasantly. (**)
36 / EN
Reason
There might be unbalanced load in the machine.
The machine will not spin if water is not drained
completely.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
Insufficient amount of detergent has been used
over a long period of time.
Washing was made at low temperatures for a
long time.
Insufficient amount of detergent is used with
hard water.
Too much detergent is used.
Insufficient amount of detergent is used.
Excessive laundry was loaded in.
Wrong programme and temperature were
selected.
Wrong type of detergent is used.
Too much detergent is used.
Regular drum cleaning is not applied.
Odours and bacteria layers are formed on the
drum as a result of continuous washing at lower
temperatures and/or in short programmes.
Solution
• Automatic unbalanced load detection
system might be activated due to the
unbalanced distribution of the laundry
in the drum.
• Check the filter and the draining hose.
• Use recommended amount of
detergent.
• Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
• Select the proper temperature for the
laundry to be washed.
• Using insufficient amount of
detergent with hard water causes the
soil to stick on the cloth and this turns
the cloth into gray in time. It is difficult
to eliminate graying once it happens.
Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
• Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
• Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
• Do not load the machine in excess.
Load with amounts recommended
in the "Programme and consumption
table".
• Select the proper programme and
temperature for the laundry to be
washed.
• Use original detergent appropriate for
the machine.
• Put the detergent in the correct
compartment. Do not mix the
bleaching agent and the detergent
with each other.
• Clean the drum regularly. For this,
please see 4.7.2.
• Leave the detergent drawer as well
as the loading door of the machine
ajar after each washing. Thus, a humid
environment favorable for bacteria
cannot occur in the machine.
Washing Machine / User Manual