Cadillac 2009 DTS Owner's Manual page 382

3. For models with exposed lug nuts, loosen them using 4. Find the jacking location from the diagram above
the wheel wrench. Do not remove them yet. and use the corresponding cutouts located in the
plastic molding.
The front location is (A) 8.5 inches (21 cm) from the
rear edge of the front wheel well, and the rear
location (B) is 3.5 inches (8.5 cm) from the front
edge of the rear wheel well.
The notches may also be labeled JACK with an
arrow pointing to the jacking location on the vehicle.
5-78