Subscribe to Our Youtube Channel
Summary of Contents for Endress+Hauser ControlCare SPC350
- Page 1 Operating Instructions ControlCare SPC350 15" and 19" Panel PCs with P View Software P C 3 5 0 lC a re S C o n tr o BA046S/04/en/03.06 Version 1.00.xx 70103681...
-
Page 3: Table Of Contents
5.4.7 Ethernet network ....15 5.4.8 Hardware extensions ....15 Endress+Hauser... -
Page 4: Revision History
Microsoft logo are registered trademarks of the Microsoft Corporation. ® Acrobat Reader is a registered trade mark of the Adobe Systems Incorporated. All other brand and product names are trademarks or registered trademarks of the companies and organisations in question Endress+Hauser... -
Page 5: Safety
Endress+Hauser Process Solutions AG. Technical improvement Endress+Hauser reserves the right to make technical improvements to its software and equipment at any time and without prior notification. Where such improvements have no effect on the operation of the equipment, they are not documentated. If the improvements effect operation, a new version of the operating instructions is normally issued. -
Page 6: Conventions And Icons
A terminal which must be connected to earth ground prior to making any other connection to the equipment Equipotential connection (earth bonding) A connection made to the plant grounding system which may be of type e.g. neutral star or equipotential line according to national or company practice Endress+Hauser... -
Page 7: Identification
• Store the accompanying documents in a safe place If you find that the Panel PC has been damaged in any way, do not put it into operation. In this case, contact your Endress+Hauser Sales Center. Return the device, where possible in the original packing, to us. -
Page 8: Device Name
40 MB 100 MB Keyboard No keyboard Compact keyboard with trackball Keyboard and optical mouse Hardware Extension Without Floppy drive via USB DVD-RW via USB PROFIBUS No PROFIBUS PROFIBUS Master Slot Extension Not used Additional option Not used SPC350 Endress+Hauser... -
Page 9: Function And System Design
Function and System Design Function ControlCare SPC350 is an industrial PC with preinstalled operating system, Internet Explorer and P View Server software. The device can also be used as a P View client or Web-client. It is supplied as part of a packaged solution that also includes a P View SCADA application. -
Page 10: Mechanical Installation
In all cases it must be ensured that the temperature of the surrounding air does not exceed +45°C (110°F). • For the 19" monitor, the filter mat must be cleaned or exchanged from time to time. 15" Monitor 19" Monitor Fig. 4-1: Ventilation Endress+Hauser... -
Page 11: Installation Of The 15" Monitor
• Degree of protection IP 65 is attained only for plate thickness of 2 mm (0.1") or greater. It must also be insured that the panel is correctly installed by skilled personnel using the M5 nuts provided and that the rubber gasket is properly seated. Threaded post bolts FHS-M5-25 (PEM) Cellular rubber gasket Fig. 4-3: Fastening and sealing Endress+Hauser... -
Page 12: Installation Of The 19" Monitor
M5 nuts provided and that the rubber gasket is properly seated. Cellular rubber gasket Threaded post bolts 10x FHS-M5-25 (PEM) Fig. 4-5: Fastening and sealing Endress+Hauser... -
Page 13: Electrical Installation
• Pull out the plug before opening the device. Special precautions for 24 VDC devices: • The panel PC may be connected to a safety extra low voltage (SELV) circuit only. • The circuit transformer must fulfil the pertinent standards. Endress+Hauser... -
Page 14: Power Supply 15" Monitor
• Connect a 2-core cable to the plug supplied and insert it into socket in the Panel PC housing. Note the polarity. • Connect the other end of the cable to a 24 VDC power supply that fulfils the requirements of a safely extra low voltage (SELV) circuit to EN 60950. Endress+Hauser... -
Page 15: Power Supply 19" Monitor
• Plug the IEC 320 connector on the detachable IEC cord set supplied into the receptacle on the rear of the housing. • Plug the line connector at the other end of the cord set into a line socket with a functioning ground contact. Endress+Hauser... -
Page 16: Peripherals
The connectors for the peripherals are to be found on the lefthand side of the housing, see Fig. 5-5: PROFIBUS LED Run (green) Ready (yellow) COM1 RS-232 PROFIBUS (Service) COM2 RS-232 (not connected) PROFIBUS DP/RS-485 female connector LPT1 Ethernet0 Ethernet1 PS/2 mouse PS/2 keyboard USB0 USB1 Fig. 5-5: Peripheral connectors, 19" monitor Endress+Hauser... -
Page 17: Keyboard
• For computer-computer connections, use a crossed Ethernet cable. • For computer-switch connections, use a standard Ethernet cable. 5.4.8 Hardware extensions A floppy or DVD-RW drive can be connected to the USB port. The following options are available: • External floppy drive • External DVD-RW drive. Endress+Hauser... -
Page 18: External Interfaces
ControlCare Panel PC SPC350 has two Type A 4-pin USB receptacles (double-decker) labelled "USB A" and "USB B", USB Type A USB A USB B Description 4-pin Power (+5V / 0,5A) USB0- USB1- Data USB0+ USB1+ Data Ground Tab. 5-3: USB [double] Endress+Hauser... -
Page 19: Vga Port
ControlCare Panel PC SPC350 has a 6-pin MiniDIN port labelled "PS/2 keyb" for the connection of an external PS/2 keyboard. MiniDIN female Signal Description Input/ connector, 6-pin Output KBDAT Keyboard Data MSDAT Mouse Data Ground VCC_PS/2 (+5V) Power KBCLK Keyboard Clock MSCLK Mouse Clock Tab. 5-6: PS/2 keyboard Endress+Hauser... -
Page 20: Profibus Dp Port
Signal Ground --- Datenbit 5 Signal Ground --- Datenbit 6 Signal Ground --- Datenbit 7 Signal Ground --- ACK- Acknowledge Signal Ground --- BUSY+ Busy Signal Ground --- Paper End Signal Ground --- SLCT+ Select Tab. 5-8: LPT1 parallel printer port Endress+Hauser... -
Page 21: Commissioning And Operation
We recommend that the backlights are replaced after this time has elapsed. Property Operating conditions Life time of display backlights (MTBF) min. 50.000 h When it becomes necessary to exchange the backlights, please contact your Endress+Hauser Service department for more information. Endress+Hauser... -
Page 22: Technical Data
Power Supply Attribute 15" ControlCare Panel PC SPC350 19" ControlCare Panel PC SPC350 Power supply 18...36 VDC (SELV) 90...260 VAC (autorange) Protection to IEC 60950 – Class I Power consumption Max. 100 W Max. 160 VA Endress+Hauser... -
Page 23: Operating Conditions
(19" x 14" x 3.5") (19" x 15.5" x 8.1") for details see Page 6 for details see Page 7 Certificates and Approvals Approval Attribute 15" ControlCare Panel PC SPC350 19" ControlCare Panel PC SPC350 CE Certificate EMC conformity EMC conformity UL Certificate Endress+Hauser... - Page 24 ControlCare Panel PC SPC350, 15" Monitor Dimensions Dimensions in mm (in) Abmessungen in mm (in) FHS-M5-25 (PEM) 354.8 (14.0) 344.8 (13.6) 336.8 (13.2) 250.4 (9.9) 104.4 (4.1) 308 x 232 (12.1 x 9.1) 18 (0.8) 10 (0.4) 0 (0.0) 482.6 (19.0) Endress+Hauser...
- Page 25 ControlCare Panel PC SPC350, 19" Monitor Dimensions Dimensions in mm (in) Abmessungen in mm (in) FHS-M5-25 (PEM) 399.2 (15.5) 389.2 (15.3) 380.2 (14.75) 317.5 (12.5) 376.2 x 301.0 (14.8 x 12.2) 82.5 (3.25) 19 (0.75) 10 (0.2) 0 (0.0) 482.6 (19.0) Endress+Hauser...
-
Page 26: Index
Printer ........15 PS/2 keyboard port ......17 Endress+Hauser... - Page 28 www.endress.com/worldwide...
Need help?
Do you have a question about the ControlCare SPC350 and is the answer not in the manual?
Questions and answers