Operational Instructions Charging; Power On/Off; Pairing - AT&T H200 User Manual

Operational Instructions
Charging
Charge your H200 through any USB jack or wall charger.
The LED indicator will glow red when charging. Before
Note: When the battery is fully charged, the LED indicator will change to blue.

Power ON/OFF

Press and hold the ON/OFF button for 2-3 seconds to
powered on. Press and hold the ON/OFF button for 3

Pairing

2-3 seconds to start pairing mode. Once the headset is in
'H200' among discovered Bluetooth devices on the phone
to Pair.
Note: If the headset is not paired with a Bluetooth device in 3 minutes, it will turn
Page 7