Page 2
ATTENTION Contact us at Twitter. (Scan this QR code) Official Discord channel: https://discord.gg/yFSTWJrA6R PLEASE DO NOT RETURN THIS PRODUCT UNTIL YOU CONTACTED US. IMPORTANT. Contact customer service if you have any questions regarding assembly or proper operation of the device. Email us at: support@midaswirelss.com Call us at: (+86) 21-52685889...
. 2.Please join Midas discord channel and follow Midas official twitter and you can get help from professional technical support and advices from the community. It is also useful to read all QnAs on Midas official website. Important Notes This product can only be used indoors.
Page 6
5V DC-DC adapter Plug in the provided 5V DC-DC power adapter into an outlet and screw in the provided antenna on the back of the Midas-926 Gateway. Connect the device using Ethernet cable with your router and make sure the internet access is avaible.
If system LED doesn’t light up at all, the OS may be not working. If the yellow LED lights up, that means either Midas-926 Gateway is not connected to Internet or not synchronized to Helium network. during operation, if yellow LED and gateway LED both light up at the same time, there must be some software failure in the device.
Page 8
HELIUM APP INSTRUCTION This Midas-926 Gatewa can work with Helium App so you can easily use it to join Helium network. To get started, make sure you have the Helium App downloaded to your mobile device. A minimum version of app version 2.5.0 is required for iOS (iOS version 13 and above) and Android (OS 8 and above).
FCC WARNING Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the Midas-926 and is the answer not in the manual?
Questions and answers