Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ScentAir ScentWave SWD1001
- Page 1 ScentWave™ SWD1001 SCENT DELIVERY SYSTEM Installation and Operation Instructions...
- Page 2 TABLE OF CONTENTS Required Tools ......................2 About .......................... 2 System Overview ......................2 Default Settings ......................3 Installation Determine Mounting Locations .................. 4 Wall Mount Plate Installation ..................4 Wall Mount Arm Installation ..................5 Cartridge Installation ....................6 System Control Unit Functions .........................
- Page 3 DEFAULT SETTINGS Your ScentWave™ system comes pre-programmed with the Time of Day set to Eastern Standard Time (UTC -5) and Event 1 programmed to run on AUTO for 60 seconds ON and 60 seconds OFF, begining at 9:00am and ending at 5:00pm. The fragrance knob will be at the 12:00 posiiton.
- Page 4 Wall Mounting Plate Installation Install preparation: FIG. A • Ensure that the wall mounting plate is level and mark two hole locations with a pencil. Choose the best two hole options, choosing either the small or large openings. • Use your screwdriver to drive the provided white plastic anchors into the wall. •...
- Page 5 Wall Mounting Arm Installation Install preparation: FIG. D • Remove the mounting ring from the base by loosening the retainer ring on the universal mount arm. • Hold the base in the desired location on the wall, mark three screw holes with pencil.
- Page 6 Cartridge Installation Locate the scent cartridge that was shipped with the system and remove the cartridge from the shipping container. Remove the shrink-wrapped plastic from the cartridge. Plug the scent cartridge cord into the connection on the inside bottom front of the ScentWave™.
- Page 7 SYSTEM CONTROL UNIT Functions • MASTER POWER: TIMER will utilize the internal programming and provide coverage at customizeable times. Up to two (2) daily events can be programmed. ON will cause the system to run only on the selected MODE option. OFF shuts down the system. •...
- Page 8 For further assistance please contact Client Relations at: 866.723.6824 clientrelations@scentair.com...
Need help?
Do you have a question about the ScentWave SWD1001 and is the answer not in the manual?
Questions and answers