Status; Statistics - Advantek Networks AWN-USB-11N2 User Manual

Wireless – n usb adapter

Table of Contents

[Data Encryption]

Disabled:

Disable the WEP Data Encryption.

WEP:

Enabled the WEP Data Encryption. When the item is selected, you have to continue

setting the WEP Key Length & the key Index.

TKIP:

Enable the TKIP Data Encryption. When the item is selected, you have to continue

setting the Network Key & Confirm network key.

AES:

Enabled the AES Data Encryption. When the item is selected, you have to continue

setting the Network Key & Confirm network key.

Passphrase:

Enter a passphrase (password phrase) of up to 63 case-sensitive printable

characters.

Network Key:

The keys are used to encryption data transmitted in the wireless network. Fill

in the text box by following rules below:

64-bit: Input any 5 ASCII characters or 10 digit Hex values (in the "A-F", "a-f", and

"0-9" range) as the encryption keys. For example: "0123456aef"

128-bit: Input any 13 ASCII characters or 26 digit Hex values (in the "A-F", "a-f", and

"0-9" range) as the encryption keys. For example: "01234567890123456789abcdef"

Confirm Network Key:

Key Index (Advanced):

3.4 Status

In the "Status", you can view the current link status of USB Wireless LAN adapter.

In the "Statistics", you can get the real time information about the packet transmission and

Re-type again the Network key in this text box.

The maximum of key index is 4.

Table of Contents