Advertisement
Quick Links
Deluxe Fryer Stand
Assembly, Use and Care Manual
Model: TF2034801-OG
Ref. Style: 2517T-STAND
Tools Required:
Philips Screwdriver / Adjustable Wrench
This instruction manual contains important information necessary for the proper
assembly and safe use of the appliance.
Read and follow all warnings and instructions before assembling and using the
appliance.
Follow all warnings and instructions when using the appliance.
Keep this manual for future reference.
This appliance is NOT for frying turkeys.
TF2034801-OG Eng
For Outdoor Use Only
Page 1 of 15
20181224-V1
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Outdoor Gourmet TF2034801-OG
- Page 1 Deluxe Fryer Stand Assembly, Use and Care Manual For Outdoor Use Only Model: TF2034801-OG Ref. Style: 2517T-STAND Tools Required: Philips Screwdriver / Adjustable Wrench This instruction manual contains important information necessary for the proper assembly and safe use of the appliance.
- Page 2 7. The minimum environmental temperature of this appliance is -21°F (-29°C). Do not use this appliance under above rated temperature. Failure to follow these instructions could result in fire, explosion or burn hazard which could cause property damage, personal injury or death. Page 2 of 15 TF2034801-OG Eng 20181224-V1...
-
Page 3: Prop 65 Warning
WARNING: Indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. CAUTION CAUTION: Indicates a potentially hazardous situation or unsafe practice which, if not avoided, may result in minor or moderate injury. Page 3 of 15 TF2034801-OG Eng 20181224-V1... - Page 4 Do not move the appliance when in use. Allow the cooking vessel to cool to 115°F (45°C) before moving or storing. Page 4 of 15 TF2034801-OG Eng 20181224-V1...
- Page 5 If you see, smell, or hear escaping gas, immediately get away from the LP tank / appliance and call your FIRE DEPARTMENT. All spare LP tanks must have safety caps installed on the LP tank outlet. Page 5 of 15 TF2034801-OG Eng 20181224-V1...
- Page 6 Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice. To remove gas from LP tank, contact an LP dealer or call a local FIRE DEPARTMENT for assistance. Check the telephone directory under “GAS Companies” for nearest certified LP dealers. Page 6 of 15 TF2034801-OG Eng 20181224-V1...
- Page 7 The regulator will seal on the back-check feature in the LP tank valve, resulting in some resistance. An additional one-half to three quarters turn is required to complete connection. TIGHTEN BY HAND ONLY – DO NOT USE TOOLS. Page 7 of 15 TF2034801-OG Eng 20181224-V1...
- Page 8 Customer Service Center at 1 – 888 – 837 – 1380. Use only replacement parts specified by manufacturer. 6. Always close LP tank valve after performing tank test by turning hand wheel clockwise. Page 8 of 15 TF2034801-OG Eng 20181224-V1...
- Page 9 If there is evidence of abrasion, wear, cuts or leaks, the hose assembly must be replaced prior to the appliance being put into operation. The replacement hose Air damper assembly shall be that specified by the manufacturer. Page 9 of 15 TF2034801-OG Eng 20181224-V1...
- Page 10 Keeping the ventilation opening(s) of the cylinder enclosed free and clear from debris. Clean all cooking surfaces of vessels, aluminum pots and pan with warm, soapy water and a nylon cleaning pad to avoid oxidation, corrosion and rusting. Page 10 of 15 TF2034801-OG Eng 20181224-V1...
- Page 11 Replace corroded or damaged burners that would emit excess gas. For cooking surfaces like pots and pans: Clean the cooking surface with soapy water and a nylon cleaning pad. Product Diagram Part# Description Welded Stand Burner Regulator Hose Assembly Heat Shield Hook Page 11 of 15 TF2034801-OG Eng 20181224-V1...
- Page 12 2. Insert the threaded pin on the bottom of the burner into the centre hole in the burner bracket. Make sure the alignment pin is seated in the notch on the edge of the burner bracket. Place the heat shield (4) beneath. This nut has been pre-assembled on the burner. Page 12 of 15 TF2034801-OG Eng 20181224-V1...
- Page 13 3. Insert the Regulator Hose Assembly (3) fitting into the burner and tighten. Be sure not to strip threads on brass fitting. DO NOT OVERTIGHTEN. Proper connection is critical for correct operation of the unit. 4. Attach the Hook (5) to Regulator (3). Page 13 of 15 TF2034801-OG Eng 20181224-V1...
- Page 14 Prior to lighting, position thermometer clip so that at least 2.75” of thermometer tip is submerged in oil. Reposition thermometer as necessary to cook. Continue to use thermometer until burner is turned off. Page 14 of 15 TF2034801-OG Eng 20181224-V1...
-
Page 15: Limited Warranty
8:00am to 5:00pm, Pacific Standard Time, Monday to Friday RANKAM (CHINA) MANUFACTURING COMPANY LIMITED 18/F., New Lee Wah Centre, 88 Tokwawan Road, Kowloon, Hong Kong Customer Service: – – – 1380 customerservice@rankam.com 8:00am to 5:00pm, Pacific Standard Time, Monday to Friday Page 15 of 15 TF2034801-OG Eng 20181224-V1...
Need help?
Do you have a question about the TF2034801-OG and is the answer not in the manual?
Questions and answers