Advertisement
Step 1:
Remove Cabinet (A) from box then remove
LCD Display, Access Panel, Printer Tray,
Dymo Tray and Castor box from inside
cabinet and set aside
C
E
Step 3:
A�er flipping cabinet upright, place the Printer Tray
(E) on the le� side of the cabinet, aligning the holes
as shown; then fasten using two M6 Philips Head
Bolts (C)
C
Step 5:
Place the LCD Display (G) atop the cabinet, aligning
the holes provided, then fasten with six M6 Phillips
Head Bolts (C)
For technical support on our products or addi�onal accessories, please call us at 248-624-7710 or visit our web site: www.dedoes.com
PAGE 2 OF 2
Custom CPU Cabinet Assembly Instruc�ons
Part No: 800135A
A
Step 2:
Place Cabinet (A) on its' back and install two 5" Swivel
Castors (B) in the front of the base using six M6 Phillips
Head Bolts (C) then install two 5" Fixed Castors (D) in the
back of the base using six M6 Phililps Head Bolts (C), as
shown.
Step 4:
Place the Dymo Tray (F) on the right side of the
cabinet, aligning the holes as shown; then fasten
using two M6 Philips Head Bolts (C)
G
Step 6:
Insert Access Panel (H) into slots provided
in the rear of the cabinet
A
B
D
PART# P0787 KD RV.4 2017-09-21
C
C
F
H
Advertisement
