Settings Menus - Eastern Energy DT-870 Y User Manual

4. SettingsMenus
4.1. Using Settings Menus
 Press OK button to open the Settings Menus,as show below.
 Press UP / DOWN button to select menu item or change the value of current
focus item.
 Press OK button to enter the submenu or set focus on the current
sellecteditem.PressESC button to return to the previous menu.
 If want to exit settings menus, can press HOLD button or press ESC button
in root menu.
4.2. Settings details
4.2.1. Palette mode
Thermal imager has five kinds of palette,such as:
Press OK button to select on of display color palettes.
4.3. Temp Unit
Press OK button to set focus on this option and the color of option value will change
to blcak .Infocus state, use the RIGHT / MENU button to toggle℃,℉ and K, use
ESC / OK button to exit focus state and the color of option value will change to blcak
.
4.4. Measure
Press OK button to enter measure menu.Two selections are available: Temp.Max
and Temp.Min.Press OK button to set cur select item on or off.
 Screening mode:This option enables thermal imager measure surface
temperature.
 Alarm temperature:In screening mode, if surface temperature is higher than
alarm temperature, then buzzer alarm will be triggered.
HT64
.\